Sleeved cans

[TVR_Tuscan]

Anyone got suggestions on where to get proper sleeves for my cans? Any techniques/hints?

Thnx.

[rens914]

take the CC's off and go to a blacksmith for the proper size
then let him spotweld them in
cant be more then 20 gpb
rens

[stillgrinning]

I got some pipe from Demontweeks on the recommendation of someone on here (about 4 years ago). It cost £17 and arrived 2 days later and took 15 minutes to cut up with a hacksaw and hammer down the inside of the silencer. I had always meant to put a screw or something in but they have been fine without anything.

I can't be any more help I'm afraid but if you ring the part dept at Tweeks they will probably know what diameter you will need.

[BGB autosport]

52mm stainless pipe

[T66ORA]

I can`t believe this is 5 years old My idiots guide to sleeving
http://www.pistonheads.com/gassing/topic.asp?h=0&a...

[stillgrinning]

Thats the one ! (only I didn't bother taking the cans off before sleeving them).

If the reference to Tweeks's website doesn't work for any reason then give them a ring - it was very simple.

The effect is stunning - the simplest, most effective and cheapest modification you will make to your car !

Ian