Alarm Sensitivity
Discussion
Thanks pete for a moment i thought you was going to get you're own back.
Can't remove tunnel completely as screw at the back under vent just spins i wonder if there's a nut underneath.
Did manage to get my fingers underneath around handbrake but just felt the air pipe so gave up looking in that area

Can't remove tunnel completely as screw at the back under vent just spins i wonder if there's a nut underneath.
Did manage to get my fingers underneath around handbrake but just felt the air pipe so gave up looking in that area

SP6 Animal said:
Thanks pete spot on screw thread was wrapped in carpet thread now fitted new screw after ripping it out
Sensitivity was set to half now at a third that screw slot is small.

Sensitivity (field of vision) of the microwave sensor will vary dependant on ambient temp. They are a PITA to set up. The cover should pop off the box to make adjusting the pot easier.
Sensitivity was set to half now at a third that screw slot is small.

Shep
Curdster said:
Shep can you quantify "field of vision". Is it an "eye" and if so where is it? I was under the impression it was a motion sensor. Can you PM me as I am driving the neighbours mad and I think the fitted cover I use may be causing movement in the wind/rain etc.
YHM. More to do with its placement I suspect as well as how sensitive its set....Forums | Tuscan | Top of Page | What's New | My Stuff



