windows 7 doesn't accept diagnostic software
windows 7 doesn't accept diagnostic software
Author
Discussion

CoasTVR

Original Poster:

25 posts

201 months

Wednesday 28th April 2010
quotequote all
If you are keen to replace your laptop please make sure that you keep your old one with XP software (or older): the diagnostic software doesn't run on the new windows 7, at least not on my new Toshiba. It has something to do with 64 bits versus 32...
If anyone knows a solution, please share...

Buss

Lucozade

2,574 posts

308 months

Wednesday 28th April 2010
quotequote all
CoasTVR said:
If you are keen to replace your laptop please make sure that you keep your old one with XP software (or older): the diagnostic software doesn't run on the new windows 7, at least not on my new Toshiba. It has something to do with 64 bits versus 32...
If anyone knows a solution, please share...

Buss
Windows 7 comes in both 32-bit and 64-bit versions. You would only install 64-bit if your laptop supported it.

I'm presuming the software is 32-bit. However, most 32-bit applications will still run under 64-bit Windows.

CoasTVR

Original Poster:

25 posts

201 months

Wednesday 28th April 2010
quotequote all
that was my reasoning as well. but windows refuses to accept the software and asks for a 64 bit version.
Buss

T350 Al

624 posts

220 months

Wednesday 28th April 2010
quotequote all
It's a bit of a long-winded way around it, but you could try installing Linux to a USB Memory Stick which saves you from having to install it to your hard drive (it will run straight from the memory stick; I use Ubuntu). You then install a program called Wine which is, in effect, a Windows emulator and then run the ECU software from there. I've gotten it to work really well this way.

Hope you find an easier workaround!

Mattt

16,664 posts

247 months

Wednesday 28th April 2010
quotequote all
Windows 7 Pro & Ultimate have an XP mode.

You can also try running the file in legacy mode.

Englishman

2,253 posts

239 months

Wednesday 28th April 2010
quotequote all
Will probably work in an XP compatibility mode - just right click on the TVRDIAGNOSTIC.exe file, select the compatibility tab, tick the Compatibility box, and select one of the XP modes. Haven't tried it personally as I still have an XP laptop!

Edited by Englishman on Wednesday 28th April 19:34

CoasTVR

Original Poster:

25 posts

201 months

Friday 30th April 2010
quotequote all
thanks guys for all the tips: so far the compatibility mode doesn't work, however hard I tried. but the version of T350 Al works! It takes somne downloading, but it's cheaper than buying an old XP laptop. It needs some PC savvyness, but after a lot of fiddeling teh TVr software started. Unfortunately my car is now in service so I have to try it live later.
cheers
Buss