Oil temperature sensor
Oil temperature sensor
Author
Discussion

dmacw

Original Poster:

73 posts

193 months

Monday 16th August 2010
quotequote all
Hi,

New to all this - bought my dream car at the weekend, now a proud owner of an '01 Tuscan S.

Noticed the oil temerature sensor doesn't read, but pressure is fine. Is this an easy fix?

Also, drivers door rattles on the cobbles - tried to get the door pocket off a la http://www.mytuscan.co.uk/problems_main.php#squeak... but my hand and allen keys are too big. Any suggestions?


Cheers

shep1001

4,620 posts

218 months

Monday 16th August 2010
quotequote all
[quote=dmacw]Hi,

New to all this - bought my dream car at the weekend, now a proud owner of an '01 Tuscan S.

Noticed the oil temerature sensor doesn't read, but pressure is fine. Is this an easy fix?

Also, drivers door rattles on the cobbles - tried to get the door pocket off a la http://www.mytuscan.co.uk/problems_main.php#squeak... but my hand and allen keys are too big. Any suggestions?


Cheers[/quote

If its the sensor, I believe its in the side of the oil tank at the bottom. (it is on the Tam anyway) I guess its easy enough to remove but you would need to capture and replace the oil that came out the hole. I would check the wires/connections to the sensor first might be even easier fix.

Shep

nawarne

3,176 posts

289 months

Tuesday 17th August 2010
quotequote all
The door card allen screws are best taken off using a 1/4" drive rachet spanner with a 4mm (?) socket type allen key on an extension bar to clear the door card bolster.

I've got 3 screws on the passenger side and 2 drivers side.

Nick

dmacw

Original Poster:

73 posts

193 months

Tuesday 17th August 2010
quotequote all
Cheers guys,
I had two screws in both sides and an empty hole on both sides.
Both doors have been off and sprayed with silicon. Also removed a 20p which was probably to blame.
Oil sensor is probably a weekend job.