Wavy Dash Tuscan
Discussion
There was a guy offering a non-factory hand book for the later Tuscan on the TVRCC Archive forum a little while ago, may be worth trying there. TVR never published one originally. The handbook for mine (2006 Convertible) has the pod-style dash of the early mk 2 Tuscan Targa.
Leven were looking at selling the alloy stalks based on those used on the Ascari car (same Ford column) and Keith Hulme has a set on his convertible and jolly nice they look too. If they can't supply them you will be able to pick some up from one of the breakers (Bell Hill etc). I've put the original Tamora / T350 style ones on mine, bought from TVRDean in Ashington, Northumberland. He advertises on Ebay for salvage TVR's quite a bit! About £50 each from memory and not hard to fit once you've swapped over the trim sleeve. Huge improvement visually.
Paul
Leven were looking at selling the alloy stalks based on those used on the Ascari car (same Ford column) and Keith Hulme has a set on his convertible and jolly nice they look too. If they can't supply them you will be able to pick some up from one of the breakers (Bell Hill etc). I've put the original Tamora / T350 style ones on mine, bought from TVRDean in Ashington, Northumberland. He advertises on Ebay for salvage TVR's quite a bit! About £50 each from memory and not hard to fit once you've swapped over the trim sleeve. Huge improvement visually.
Paul
You can download a copy from here http://mytuscan.co.uk under downloads & manuals convertable cabin controls.
As for the alloy storks they are quiet hard to find, only possibility is a breakers yard. Leven did make a few sets some time ago, but I doubt there will be another run of thoes.
As for the alloy storks they are quiet hard to find, only possibility is a breakers yard. Leven did make a few sets some time ago, but I doubt there will be another run of thoes.
Forums | Tuscan | Top of Page | What's New | My Stuff


