Camber adjustment

[GT6k]

How do I adjust the camber on the front ? I seem to be getting excess wear of the tyre inner edges and the tracking is spot on, I can't pick up too much movement in the drag link bushes either.

Thanks in advance

[grahamn]

Just loosen off the 2 bolts that secure the hub on the top wishbone. Be careful though as any adjustment to the camber will throw the tracking miles out.

[Ireland]

The standard geometry set up on the Cerb has negative camber on both the front and rear.

Negative camber will cause the inside of the tyre to wear more than the outside.