A Clip, a clip, my kingdom for etc.
Discussion
I found I was missing clips on some of my injectors after my engine was reinstalled so had to buy the pugs to get the clips.
This was where I got them, but I'm away from home currently so don't have the exact part, although this looks close
https://efi-parts.co.uk/product/2-pin-junior-power...
This was where I got them, but I'm away from home currently so don't have the exact part, although this looks close
https://efi-parts.co.uk/product/2-pin-junior-power...
It is a Junior Power/Timer connector, they are extremely commonly used on sensors and fuel injectors. A whole connector is cheap, but if you can find a bit of spring steel wires it would be easy enough to make a clip (I have a bag of glazing clips from a greenhouse I use to make stuff like this).
Guys,
Many, many thanks for all your suggestions.
Gordon: I have tried so long to use RS for parts BUT the English side don't ship or allow payments from abroad and the Lux side want a Belgian VAT No. and address to ship to.
Dave: Thanks for recommending EFI. Don't remember using them before BUT the delivery costs, with them, are 300% more than the cost of the products.
LimSlip: Thanks for the suggestion. I will visit the Garden Centre and see what's around.
OOps, just realised that you included an accurate description of what they are - The World is open to me now



Hi Rik: Thank for that - always good advice - BUT have looked everywhere so the only other option is to strip the heads to ensure that it has not burrowed its way in !
Thanks all, for every suggestion.
Looks like the Gaffer Tape is coming out again until my next visit to the UK
Many, many thanks for all your suggestions.
Gordon: I have tried so long to use RS for parts BUT the English side don't ship or allow payments from abroad and the Lux side want a Belgian VAT No. and address to ship to.
Dave: Thanks for recommending EFI. Don't remember using them before BUT the delivery costs, with them, are 300% more than the cost of the products.
LimSlip: Thanks for the suggestion. I will visit the Garden Centre and see what's around.
OOps, just realised that you included an accurate description of what they are - The World is open to me now




Hi Rik: Thank for that - always good advice - BUT have looked everywhere so the only other option is to strip the heads to ensure that it has not burrowed its way in !
Thanks all, for every suggestion.

Looks like the Gaffer Tape is coming out again until my next visit to the UK

Edited by Mr Cerbera on Saturday 29th August 11:42
Should have posted this earlier but thought others had got you sorted
https://www.autoelectricsupplies.co.uk/delivery
Goods will be despatched as soon as possible, subject to stock levels and cleared payment. Postage will be charged at £1.50 plus cost subject to a minimum charge of £4.50. The method chosen for despatch is dependent on the weight and/or value of the goods ordered, and will either be by Airmail or by Courier (Interlink).
https://www.autoelectricsupplies.co.uk/product/680...

Any car scrap yard will also have plenty of them
https://www.autoelectricsupplies.co.uk/delivery
Goods will be despatched as soon as possible, subject to stock levels and cleared payment. Postage will be charged at £1.50 plus cost subject to a minimum charge of £4.50. The method chosen for despatch is dependent on the weight and/or value of the goods ordered, and will either be by Airmail or by Courier (Interlink).
https://www.autoelectricsupplies.co.uk/product/680...

Any car scrap yard will also have plenty of them
TwinKam said:
And Paul, do satisfy yourself completely that the missing clip hasn't ended up somewhere unwelcome and expensive... 
Even though I brushed that warning off with rather a flippant comment, it set worries off in my mind.
Luckily though, I'd taken a zillion photos as I went through the job and I've just found one which shows that the clip was gone before I started - Phew !
(thanks, once again, for putting the doubt in my mind

Gassing Station | Cerbera | Top of Page | What's New | My Stuff