Ride hight TVR Cerbera 4.2 1997

[flyingdutchie]

Does somebody know what this ride hight should be and from where to where this has to be measured?

[gruffalo]

ground to rear out rigger 135mm
ground to front outrigger 125mm

or there about.

[flyingdutchie]

Thanks

[Ireland]

The spec on my car (a '97 4.2) said 130mm at all corners

[Byker28i]

gruffalo said:

ground to rear out rigger 135mm
ground to front outrigger 125mm

or there about.

120mm front, 130mm rear on mine

Check clearance. Between your exhaust and road, plus the bolts on the ladder plate on the tunnel. Those are the points that normal catch

[Mr Cerbera]

Just coz I like to add to the spice of life, I was told 150mm to centre of bottom of lower front and rear Chassis Cross Members.

I put larger allen bolts on my chassis brace though and am now running 120mm.



(Oh, and it's a 2001, Series II 4.5)

[Vee8ight]

According to the Data sheet for the Cerbera, the ride height should be measured at the dampers by measuring the lenghth of the damper/spring with weight on wheels. Front should measure 325mm and rear 353mm .