Carbon Window Trims

[Marto303]

Hi All
Can anyone tell me if the Carbon Trims for the Front & Rear Screens are still available as mine are not
in the best of nick & could do with replacement.
Martin

[ARDA]

i was at racing green the other day i wanted to change mine but you cant currently get them so your best bet is breakers

[flyingdutchie]

Tried www.carboncerbie.co.uk?

or

www.spacecomposites.co.uk?

[ajp70]

If it is that they look flakey it's not difficult to scrape back/ rub down the old lacquer and re-lacquer with a spray can

[pmessling]

Sand it down with some wet and dry, then either re-lacquer it or get some this

http://www.carbonmods.co.uk/Products/Carbon-Fibre-...

apply some coats and sand back and use metal polish to get to a good finish like this, a mirror cover i done for a MG

[Tanguero]

Nice! How did you apply the epoxy?

[pmessling]

Apply it with a brush use a non hair-loss brush. The epoxy has to be measured correctly to set I used to find a 40:60 mix worked well

[Marto303]

Thanks guys as they are not really available as replacements and I have some other paintwork to do on the car I will re-lacquer them.
Martin

[gruffalo]

Mine are currently unlaquered, is this a problem, will they degarde as a result?

I like the look of the raw carbon.