Drive shaft removal

[PABTVR]

Undone the six hex bolts on both ends and the diff side has come away but the hub side won't budge is there any other fixing I haven't undone?
Thanks

[Gray_101]

This may be of help

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

[fatjon]

Just tap it with a hammer and it will come loose. Probably just a bit of threadlock between the two faces holding it them together. They are not delicate and sometimes they need some help.

[PABTVR]

Any technices for removing shafts from cv units don't want to come out using a large hammer
Have removed circlips

[Tanguero]

They should be a sliding fit in the spline, however I had one that jammed solid a while ago. The only thing that shifted it was a 20 ton press.

[fatjon]

Bigger hammer