Original Headlight conversion ?

[DBSV8]

Have seen several posts on Tuscan style front headlight conversion , blending into wings.
Has anyone converted original single light bezels into the wings ?
If so can you post pics.

Cheers
DBS

[Extra 300 Driver]

If you do that you will be stuffed if you have to change a lens or clean the reflectors.

[redleicester]

If you mean the Speed 6 and Speed 12 blended headlight conversions, then loads of people have done them. Or you can do them unblended and just replace the pods as single units.

Have a look at www.tvrbodyshop.co.uk

[Extra 300 Driver]

redleicester said:

If you mean the Speed 6 and Speed 12 blended headlight conversions, then loads of people have done them. Or you can do them unblended and just replace the pods as single units. Have a look at www.tvrbodyshop.co.uk

DBSV8 said:

Has anyone converted original single light bezels into the wings ?

[pilmar]

I had my original single lights blended into the wings last month. I did promise to post pics but work etc left me with little time. I'll try tomorrow.
She looks a lot better than original, in my opinion anyway. I wanted to keep her as standard as possible but smooth the lines a little on those ugly lights. With regards to changing the lights, I was worried at first but upon inspection I don't think it would be a problem. I would just have to cut a bigger hole in the inner wheelarch to take the light out that way.

[Extra 300 Driver]

Are you sure that would work? I dont think it would from what I have seen. Agree it would look V nice if you can!

[DBSV8]

pilmar said:

I had my original single lights blended into the wings last month. I did promise to post pics but work etc left me with little time. I'll try tomorrow. She looks a lot better than original, in my opinion anyway. I wanted to keep her as standard as possible but smooth the lines a little on those ugly lights. With regards to changing the lights, I was worried at first but upon inspection I don't think it would be a problem. I would just have to cut a bigger hole in the inner wheelarch to take the light out that way.

[DBSV8]

Hi Paul

any chance of seeing those pics of your conversion

cheers

DBS