Discussion
Dont know about new ones, but try rhis
www.pistonheads.com/gassing/topic.asp?t=263077&f=6&h=0&hw=trumpet
www.pistonheads.com/gassing/topic.asp?t=263077&f=6&h=0&hw=trumpet
jensena said:
Dont know about new ones, but try rhis
www.pistonheads.com/gassing/topic.asp?t=263077&f=6&h=0&hw=trumpet
www.pistonheads.com/gassing/topic.asp?t=263077&f=6&h=0&hw=trumpet
Don't quite think I'm upto making my own trumpets etc, its gonna have to be bought off the shelf - any suppliers?
MB
jensena said:
Marcus - if you read down the bottom of the thread, he said he could make to order for £50.00
Cyclone1 said:
Marcus,
Can your current box not be repaired? What's wrong with it / them?
Jules.
Can your current box not be repaired? What's wrong with it / them?
Jules.
All the trumpets that attach to the purple pipes are starting to deteriorate/breakdown and some of the sealant is starting to come astray!! After the amount of time spent painting calipers, its just another job I haven't got the time for! I don't mind getting stuck in, but I've got so many other things to do, I just can't see myself fitting this one in!
Cheers
MB
jensena said:
jensena said:
Marcus - if you read down the bottom of the thread, he said he could make to order for £50.00
I did read the whole thread, it just seemed that the poor guy was being slightly forced into doing it - I know what its like when others require your services, its hard to say no.
MB
mikesr said:
Nice carbon - what no trumpets !!!
MB
marcus1970 said:
FUBAR said:
Do you need the airbox or the backplate and trumpets? Or both?
Having had another look, I suppose I just need the backplate and trumpets.
MB
These?
www.actproducts.co.uk/inductioncomponents.php
FUBAR said:
marcus1970 said:
FUBAR said:
Do you need the airbox or the backplate and trumpets? Or both?
Having had another look, I suppose I just need the backplate and trumpets.
MB
These?
www.actproducts.co.uk/inductioncomponents.php
They just fit on behind the back plate do they?
I'll give ACT a ring...
Mind you if Ridds is still making his, they did look pretty good quality - any chance ?
Cheers
MB
ridds said:
As per email Marcus, can do them. Have a few for others to do as well.
Send me some pics of the backplates if you can. I may be able to sort them out.
Send me some pics of the backplates if you can. I may be able to sort them out.
I think they'll be ok, but I won't know until I get them out, as I have to drive the car every day and its just finding enough time to get it all done and back together.
By the way, I must say that I have found the black loctite sealant to be excellent, although a little expensive.
MB
Forums | Cerbera | Top of Page | What's New | My Stuff


