Discussion
Gap is optimum for the combustion chamber. Would tend to keep it as is set.
Only thing I would change if constantly thrapping round a circuit id the heat rating but again only do that if you have plug temp issues (check the condition of the old plugs)
Other than that just a good quality plug will suffice and make sure you torque them up.
Only thing I would change if constantly thrapping round a circuit id the heat rating but again only do that if you have plug temp issues (check the condition of the old plugs)
Other than that just a good quality plug will suffice and make sure you torque them up.
Forums | Cerbera | Top of Page | What's New | My Stuff


