Ls3 freshen up
Discussion
I’ve been out of the loop for 2years with moving/extending/kids getting in the way of real life!
My engine has been running no filters for a number of so the bores were getting scored and it was getting a bit smokey, not horrendous but more than it should.
So I’ve gone for a substantial overhaul, new big valve AFR heads, new spec cam, thicker pushrods for better valve control, new pistons rings and an overbore, new shells and bearings, friendlier hybrid clutch, plus some other bits n bobs, about £3k worth, but that gets you Top end kit.
I’ve got it running this week, straight out of the manifolds here 😊
https://youtu.be/aXUK5Xyy47c
My engine has been running no filters for a number of so the bores were getting scored and it was getting a bit smokey, not horrendous but more than it should.
So I’ve gone for a substantial overhaul, new big valve AFR heads, new spec cam, thicker pushrods for better valve control, new pistons rings and an overbore, new shells and bearings, friendlier hybrid clutch, plus some other bits n bobs, about £3k worth, but that gets you Top end kit.
I’ve got it running this week, straight out of the manifolds here 😊
https://youtu.be/aXUK5Xyy47c
Gassing Station | Cerbera | Top of Page | What's New | My Stuff