Door button not working

[Wolvesboy]

Hi All,
Searched the issue and came up with removing the mirror to enable access to the button wires. However, there must be a trick to removing the mirror? I don't obviously want to break it by pushing too hard etc.
Any advice please?

[Boatbuoy]

It's just clipped in. Move it fully to one side, insert pinkys behind exposed edge, and pull!

It feels like its going to break, but it'l pop off.

[Byker28i]

Door buttons are a standard maplin part. I haven't the weather proofing on mine and the work fine.

[Tanguero]

Door and window problems are most commonly due to corroded connectors inside the door rather than the button its self. Replacing the factory connectors with properly waterproof ones was a permanent solution to all my door problems.

[sonnylad]

Before removing mirror try pressing the button in and moving the button part sideways it will help clean the interneal terminals, worked on mine years ago untill i had time to rplace them.

[Wolvesboy]

Thanks fellas.
I got the mirror off, wiggled the button and all working good again. Tightened it up a bit and refitted everything.
Strange one that.