Cerbera 4.5 timing table

[mrniceguy351]

Gentlemen,

I am currently wiring my Cerbera up for a Haltech nexus R3. (Video to come)

In the evening once i am sick of crimping and stripping I am trying to get some sort of a plausible configuration on the haltech software. At this stage i figure I will run it based on TPSxRPM (same as stock) even though the Haltech has a built in MAP sensor (which maybe will come in useful once it's all running??)

Does anybody have the stock TPSxRPM timing table? Even if I pull a couple of degrees out for safety it would be helpful to get me in the ballpark.

Regards
Simon

[Flatplane8]

Afraid I can't help, but looking forward to seeing how you get on. Could the stock MBE adaptive table give any clues?

[mrniceguy351]

I believe the adaptive table is only for fueling.

[Markb139]

I’ve been trying to find this with a combination of a reverse engineered firmware and tracing the MbE942 circuit. I’ve then asked a couple of different AI bots to find how the timing works.
It produced a few tables, but I’ve yet to see if they look right. The AI may have made up the whole thing

[Markb139]

Here is a table generated by a script that examines the firmware for 4.2 cool rom. This is for the odd bank

RPM	0%	15%	30%	45%	60%	75%	90%	WOT
400	21.2	21.2	21.2	19.8	28.0	20.0	10.0	10.0
600	21.2	21.2	21.2	24.0	28.0	20.0	10.0	10.0
800	21.2	21.2	21.2	24.0	28.0	25.5	25.5	25.5
1000	21.2	21.2	21.2	24.0	28.0	25.5	25.5	25.5
1200	18.0	18.0	18.0	24.0	24.0	24.0	24.0	24.0
1500	18.0	18.0	18.0	28.0	32.0	38.2	28.0	37.0
1800	18.0	18.0	20.0	32.0	36.0	46.0	38.5	40.0
2000	22.0	22.0	22.0	20.2	30.5	40.5	42.0	41.0
2500	26.0	26.0	26.0	26.0	36.2	41.5	48.8	48.0
3000	28.0	28.0	28.0	28.0	41.0	59.0	62.0	61.5
3500	28.0	28.0	28.0	28.0	48.0	59.0	62.0	62.0
4000	32.0	32.0	32.0	32.0	50.0	59.8	63.8	63.8

This is for the even bank

RPM	0%	15%	30%	45%	60%	75%	90%	WOT
400	10.8	14.0	13.8	12.0	10.8	12.8	11.8	10.0
600	10.8	14.0	13.8	12.0	10.8	12.8	11.8	10.0
800	25.5	25.5	25.5	25.5	25.5	25.5	25.5	25.5
1000	25.5	25.5	25.5	25.5	25.5	25.5	25.5	25.5
1200	24.0	24.0	24.0	24.0	24.0	24.0	24.0	24.0
1500	24.0	22.5	21.5	21.0	20.0	24.8	24.0	26.0
1800	38.2	32.0	28.0	26.2	25.0	28.0	26.8	29.2
2000	34.2	28.0	26.0	26.0	26.0	26.0	28.0	28.0
2500	44.0	40.0	34.0	33.2	31.5	29.0	28.5	29.0
3000	54.0	48.0	34.0	32.0	32.0	32.5	32.8	33.2
3500	55.0	50.0	36.0	33.0	33.0	32.0	32.0	29.2
4000	56.0	54.0	40.0	38.0	33.0	32.5	32.0	30.5

USE THESE VALUES WITH CAUTION.
I'm not an engine guy, and most of the info extracted has been by an AI - stunning work by the AI
Cheers
Mark