Starter motor delay
Starter motor delay
Author
Discussion

RUSSELLM

Original Poster:

6,001 posts

269 months

Saturday 7th February 2004
quotequote all
Can anyone tell me how they have introduced the two second delay, when you press the black button.

Is it some sort of timer module ?

Mine has had problems recently, but on the last two occasions, when the starter hasn't fired, I've just sat there with my finger on the button, & its fired up like a good'n, all be it after 20 odd seconds.

Its as though what ever time gap is there has multiplied itself by ten.

This might be of interest to andy4200.

satman

2,455 posts

268 months

Saturday 7th February 2004
quotequote all
The soleniod power passes througha relay in the fuse panel if i remember correctly....relay number 2. Is it possible that this is faulty. Try removing and checking for corrosion on the contacts and replacing...

andy4200

5,103 posts

295 months

Saturday 7th February 2004
quotequote all
Cheers for the tip Russell

Mine hasn't done it since New Years Eve but I will try it out next time.

I'm keeping my fingers crossed that it is just one of they temporary quirks.

Andy

andy4200

5,103 posts

295 months

Thursday 19th February 2004
quotequote all
Russell

Mine done it again today, in Oldham of all places. I scratched my head and tapped a few boxes but nothing happened the I remembered your tip.....

I kept my fingure down for about a minute then she fired up when I least expected it.

I'll have to get Joolz to check the starter connection when it's in for service.

Andy

RUSSELLM

Original Poster:

6,001 posts

269 months

Friday 20th February 2004
quotequote all
Its all part of the driving experience.

Will she, wont she ?

Caused a bit of a stir the other day in a Shell garage, picture the situation, me sat there with a gormless expression on my face, one finger on the button, whilst trying to ignore the sounds of horns & shouting from the 100 yard queue that had formed behind me, lucky the radio's loud. (f*****g car !)

Apparently, I have a dodgy/dirty connection from the solenoid to the starter, holding the button must warm up the connection, allegedly.

I'll have it done on the next service.