Clutch Master cylinder!

[Mr Tank]

Hi

No doubt this has been mentioned before.

I need a new Clutch Master cylinder, what are they from and where's the best place to get one!

Then the fun fitting it!!!!!!!!!!!!!

Andy

[Mr Cerbera]

Wotcha !
20th article on this page

Managed to do it myself once I'd bought one of those double-angled ring nspanners
a la



Good Luck

[Rufus Roughcut]

Many ways to Rome as they say.

I cut a slot in the end of the lower screw with a Dremel, this made it possible to hold the nut with a spanner and turn the screw with a flat blade screwdriver.

Not a lot of room down there to manoeuvre.

Good luck