Wheel nut torque settings.
Wheel nut torque settings.
Author
Discussion

Mr Tank

Original Poster:

5,799 posts

306 months

Monday 1st September 2008
quotequote all
Hi

Having to do the silcone on the rear of the brake pads on my 4.5. I am being lazy, but doe's any body know the wheel nut torque settings are! O! and can you post them up!

Thanks in advance.

Andy

Ireland

3,517 posts

245 months

Monday 1st September 2008
quotequote all
84 works for me.


Now the flood-gates will open no doubt.

kojak

4,547 posts

284 months

Monday 1st September 2008
quotequote all
100 newtons.

Storer

5,024 posts

246 months

Tuesday 2nd September 2008
quotequote all
Tight wink

GreenV8S

31,027 posts

315 months

Tuesday 2nd September 2008
quotequote all
Not too tight. I don't know the figures specifically for that car but typically it will be somewhere in the range 65 - 85 lb-ft. People routinely do them up far more than this on the basis that they need to be 'good and tight' and just end up stretching the studs or knackering the threads.

Buffoon

881 posts

235 months

Tuesday 2nd September 2008
quotequote all
Storer said:
Tight wink
'Kintight' always worked for mehehe

jammy_basturd

29,778 posts

243 months

Tuesday 2nd September 2008
quotequote all
GreenV8S said:
Not too tight. I don't know the figures specifically for that car but typically it will be somewhere in the range 65 - 85 lb-ft. People routinely do them up far more than this on the basis that they need to be 'good and tight' and just end up stretching the studs or knackering the threads.
Indeed, an overtight wheel nut is just as bad, or worse than a loose one, as a stretched stud could snap at any minute and not give you any warning, where as at least with a loose wheel nut, it will generally slowly undo, and you'll get a knocking before the wheel falls off.

Mr Tank

Original Poster:

5,799 posts

306 months

Tuesday 2nd September 2008
quotequote all
Hi

Thanks for the info a comments. Will do them to 85 sound about it!

Regards
Andy

kojak

4,547 posts

284 months

Tuesday 2nd September 2008
quotequote all
65lbs ft to 85 lbs ft is 88 newtons to 115 newtons. Mid way is 75lbs ft.= 100 newtons. Thats what I believed the correct amount should be.

Mars

10,178 posts

245 months

Wednesday 3rd September 2008
quotequote all
An alloy wheel manufacturer once told me that no alloy wheel nut needs to be any tighter than 55lbft. You'll risk deformation to the alloy.

BCA

8,651 posts

288 months

Wednesday 3rd September 2008
quotequote all
eek I winced when dad got me to do the Cerbs wheel nuts at 100?! eek

Tanguero

4,535 posts

232 months

Wednesday 3rd September 2008
quotequote all
2 grunts = aprox 85lbft

Edited by Tanguero on Wednesday 3rd September 00:54