Nissan Ka24de suspected headlift under boost
Nissan Ka24de suspected headlift under boost
Author
Discussion

scoobydo123

Original Poster:

263 posts

93 months

Yesterday (18:17)
quotequote all
Was running cometic and that failed. Pressure in coolant I tore it down and during that process I found a few of the Arp nuts did not feel that tight compared to the others used arp lube and studs have plenty of clearance so not bottoming out. During my testing window off boost did not result in pressure in coolant. I have installed transducer on the bottom hose so can monitor. Pressure would stay for 2 days plus. I have swapped to felpro composite and thought it was ok but on my 2nd journey i kept 40kpa overnight, got a small hiss from the filler tube and once that was cleared I could still feel some pressure so pulled the bung off and had around 70ml fluid gushed out from the highpoint. Assume this cannot be air lock as engine had been left overnight so was fully cool. Arp studs on ka24de are only 10mm. Any hints or tips as this is getting annoying. Max boost is 25psi on CR around 7.64:1