Which glue to re-attach insulation matting on trans tunnel

[catfood12]

Mates

Any advice on best glue to use to re-attach some OEM heat insulation matting back onto a transmission tunnel ? Matting is fibreglass type weave with a foil front, and has just come away over time.

Thinking of evostik or araldite (although that won't go very far)....

Can't find anything in Demon Tweeks or similar for a specific product...

[HustleRussell]

Regular aerosol spray adhesive. I'd think your ideas would be overkill.

[paintman]

^^^
http://www.carbuildersolutions.com/uk/sealant-and-...

I can definitely say that evostik works on car carpet, just don't have the car windows closed if you're working with it inside the car!

[Sardonicus]

Evo-stik green I speak from experience but don't use the red Evo though

[Bennachie]

Spray carpet adhesive.

[catfood12]

Thanks for the advice all. Of course, I'm gluing on the cooler side anyway, so off for some evo-stik in the morning.

[Steve_D]

If this was carpet I was trying to work into a curved profile I would use evostick.
If you just want the insulation to hang in place until the carpet is fitted then spray carpet adhesive from screwfix will do the job fine.

Steve