Super Charged Monaro

[NAH]

I collect my car from LSV tomorrow, but the word is 560+ at the flywheel. Will post more when I've seen the dyno readout.

[bennno]

is that from the £2.5k+VAT Supercharger conversion?

[M8LC N]

What other performance mods do you have?.

[NAH]

I have headers & some other stuff fitted, Mark said he used bigger injectors. I will post all the details later. Setting off for LSV in 10 minutes.

[marcevo1]

white injectors? if so same set up as mine.

hope you enjoy it as much as i am :-)

[NAH]

OK, here it is then:

583 at the flywheel

Set-up:
85mm BBK throttle body
1.8 Rockers
CAPA Long-Tube Headers
SLP Exhaust
Vortech 5psi Kit

Will pots the dyno readout when scanned

Proper big-boys car now

See y'all at the VXR day

[marcevo1]

cool! new tyres and trousers will be in order ;-)

mines standard hsv gts with stainless exhaust only - 532bhp ...enough ;-)

looks as if the rockers may be giving higher top end bhp?

[stevieturbo]

What size are "white" injectors ?

Are these kits intercooled ???

Any rwhp figures, rather than flywheel guesstimates ??


1+1= 3 ?

[NAH]

stevieturbo said:

What size are "white" injectors ?

Are these kits intercooled ???

Any rwhp figures, rather than flywheel guesstimates ??


1+1= 3 ?

Well I wouldn't want to call the output from Marks' (LSV) dyno a 'guesstimate'. I think he paid quite a few quid for it!

[marcevo1]

stevieturbo said:

What size are "white" injectors ?

Are these kits intercooled ???

Any rwhp figures, rather than flywheel guesstimates ??


1+1= 3 ?

mine isnt intercooled rated at 500bhp at 5psi - but can be upgraded if need be - rated at 580ish bhp with 7psi on the capa website

white injectors are i think 42# Injectors?

mines flywheel bhp as well oposed to rwhp - to be honest i'm not a great believer in RR figures - all different from one to another especially on forced induction cars where the weather plays a part in it as well

all i would say its like chalk and cheese between the standard car and charged car

[NAH]

Er, dunno how to attach the dyno graphs, any advice?

[V8HSV]

Try:

http://ph.uncle-dave.co.uk/upload/

Once the image is hosted then click for its properties & then cut n paste here, add [pic] to the front of the URL & add [/pic} and the end, image will now appear, look forward to seeing the graph

[V-Car]

NAH said:

stevieturbo said:

What size are "white" injectors ?

Are these kits intercooled ???

Any rwhp figures, rather than flywheel guesstimates ??


1+1= 3 ?

Well I wouldn't want to call the output from Marks' (LSV) dyno a 'guesstimate'. I think he paid quite a few quid for it!

He must have an 'engine' dyno then, because unless the motor was taken out and put on an engine dyno, any flywheel HP figures are only an approximate guesstimate figure from the RWHP figure obtained on the chassis dyno.

[stevieturbo]

NAH said:

Well I wouldn't want to call the output from Marks' (LSV) dyno a 'guesstimate'. I think he paid quite a few quid for it!

Dyno Dynamics normal mode of operation is for wheel figures only. Anything else, does involve an element of estimation, or guesstimation.

So as already mentioned, unless it was measured on an engine dyno, the flywheel figures cannot be taken as accurate.

Impressive numbers all the same....but if its a non intercooled, and only 5psi, the numbers are amazing to say the least.

[Boosted LS1]

stevieturbo said:

NAH said:

Well I wouldn't want to call the output from Marks' (LSV) dyno a 'guesstimate'. I think he paid quite a few quid for it!

Dyno Dynamics normal mode of operation is for wheel figures only. Anything else, does involve an element of estimation, or guesstimation.

So as already mentioned, unless it was measured on an engine dyno, the flywheel figures cannot be taken as accurate.

Impressive numbers all the same....but if its a non intercooled, and only 5psi, the numbers are amazing to say the least.

Stevie, what does it mean when it's in Shootout mode and is that less accurate?

Boosted.

[stevieturbo]

Shootout mode is supposed to be a repeatable setup, where once in it, the operator cant tinker to improve/reduce the results.

I guess you could call it an industry standard across the board. All DD dynos should give the same reading anywhere, which gives results that are comparable regardless of what DD rollers are used.

[vixpy1]

stevieturbo said:

Shootout mode is supposed to be a repeatable setup, where once in it, the operator cant tinker to improve/reduce the results.

I guess you could call it an industry standard across the board. All DD dynos should give the same reading anywhere, which gives results that are comparable regardless of what DD rollers are used.

Spot on Stevie.

[Boosted LS1]

Thanks chaps,

I saw a sheet for another engine type in shoot out mode which I thought was a bit suspect. Nothing to do with this thread or lsx's.

Boosted.

[vixpy1]

Boosted LS1 said:

Thanks chaps,

I saw a sheet for another engine type in shoot out mode which I thought was a bit suspect. Nothing to do with this thread or lsx's.

Boosted.

Your welcome to send the graph or a link to it to me and i'll have a look over it if you want. Unless its one of my dyno sheets

[doleboy]

NAH said:

OK, here it is then:

583 at the flywheel

Set-up:
85mm BBK throttle body
1.8 Rockers
CAPA Long-Tube Headers
SLP Exhaust
Vortech 5psi Kit

Will pots the dyno readout when scanned

Proper big-boys car now

See y'all at the VXR day

Quality. Enjoy.