382 stroker motor

[tinker-27]

i will be selling my 382 stroker short motor soon ,forged pistons,steel i beam rods,eagle crank,built with new block 2,000 miles ago (makes 528bhp-530 ftlb) genuine reason for sale can arange fitting if required £2500 ono craig 07950399080 or [e-mail] cheers craig

[Boosted LS1]

What are you replacing it with?

Boosted.

[tinker-27]

hoppfully a 408ci going to use my heads,cam,etc

[ringram]

Not enough power hey.
Whats the spec, piston brand, piston to deck clearance, piston head volume.
Also who built it?

[tinker-27]

they are probe pistons,level deck height,i use 62cc heads with 40 thou head gaskets (no detonation problems) steel I beam rods,forged pistons,eagle crank,it was built be john barrett race engines in america ,it is still in the car and can be test driven if serious.

[ringram]

Must have had a pretty hefty cam to bleed off pressure with that setup.
Whats the static compression 12.2:1 with 62cc heads?
Tempting, but probably need 70cc heads to make it streetable.

[tinker-27]

they might be 66cc thinking about it i will look at the paper work, its a 281 comp cams cam i cant remember what dish is in the piston but the bottom was is built for std heads .

[tinker-27]

SOLD GOING INTO A CERRBRA !!

[Boosted LS1]

tinker-27 said:

SOLD GOING INTO A CERRBRA !!

Brummiewedge perchance?

Boosted.

[ss hsv]

Bugger I was hoping that would still be there in a week

[tinker-27]

yes brummiewedge ,

[Boosted LS1]

tinker-27 said:

yes brummiewedge ,

He'll be happy then

Boosted.

[tinker-27]

yes a tvr with proper power and reliable ,imagine if they came with these motors from the factory !!!!!

[Boosted LS1]

tinker-27 said:

yes a tvr with proper power and reliable ,imagine if they came with these motors from the factory !!!!!

They'd probably fall apart, lol.

Boosted.

[stevieturbo]

You cant make assumptions on CR if you dont know the pistons setup.

Ar for TVR's...

TVR's - очень надежные автомобили!!! Являются ими какой!!

translate that !!!!