LS2 coil bracket

[TheLeatherman]

Hi guys, not sure if I'm contravening any rules but I am in need of the following:

An LS2 coil bracket that bolts on to the rocker cover.

Anyone got one they are looking to get rid of or is surplus to their requirements???

Cheers

Leatherman

[TheLeatherman]

Oh and are there any highly recommended shops that can plastic weld/repair my HSV front bar for my ute in the south of the UK - it's put up with a bit of abuse over the years and so it needs fixing up.

[stevieturbo]

The brackets are pretty cheap new, albeit they would need posted from the US.

When I changed to newer coils I ended up having to buy a pair as I couldnt get any complete "takeoff" coils ets so bought parts individually.

As some guys ahve re-located their coils, someone might have something.

Maybe try Raving or Craig at Dynotorque.

Give a shout here, the usual suspects are on it

https://www.facebook.com/groups/1375847329333903/1...

[SturdyHSV]

LS2 coil brackets you say? The ones that bolt to the rocker covers? I've got some you can have

[ARAF]

For plastic repairs, it may be worth checked with local motorcycle shops to see who they use, as bike fairings have always been very expensive, so repaired more often than replaced.

[TheLeatherman]

Wonderful - thanks guys.

And PM sent!!!!

[TheLeatherman]

stevieturbo said:

The brackets are pretty cheap new, albeit they would need posted from the US.

When I changed to newer coils I ended up having to buy a pair as I couldnt get any complete "takeoff" coils ets so bought parts individually.

As some guys ahve re-located their coils, someone might have something.

Maybe try Raving or Craig at Dynotorque.

Give a shout here, the usual suspects are on it

https://www.facebook.com/groups/1375847329333903/1...

Cheers mate - will also look at that facebook group for some other parts. Luckily (I think!!) I go to NYC 1 week per month so can get some items in the USA and hand carry back with me. Trouble is I can't get the stuff I'd like back in the suitcase as it is too big!!!!

I've tried Raving a couple of times but never got any response.

I was looking at relocating my coils, but they are OK where there are in truth.

Cheers again,

Leatherman

[TheLeatherman]

ARAF said:

For plastic repairs, it may be worth checked with local motorcycle shops to see who they use, as bike fairings have always been very expensive, so repaired more often than replaced.

Funny enough a mate of mine down the pub last night said the same but also recommended a firm close by. So will strip the bar off today and take it in to see what can be done. The biggest issue is the internal side slot location bracket which appears to have self-destructed!!!!

Cheers again,

Leatherman

[Behold81]

I have a pair laying around not being used. Pm me.