How to adjust the doors on a Tamora
Discussion
Since then I've installed the new damper on my Tam , strip the door the B-pillar!
The car is now harder and it feels good.
yes, but unfortunatelly now I have to adjust the doors.
But I've never done before.
Only for me to calm down ......
Do you have an idiot statement for the disassembly of parts which have gone,or how to do ... etc.
How many space you have, or how much you can adjust in mm?
The best of course would be pictures.
Many thanks in advance TTC
The car is now harder and it feels good.
yes, but unfortunatelly now I have to adjust the doors.
But I've never done before.
Only for me to calm down ......
Do you have an idiot statement for the disassembly of parts which have gone,or how to do ... etc.
How many space you have, or how much you can adjust in mm?
The best of course would be pictures.
Many thanks in advance TTC
sidpinup said:
Well done. How do you do it out of interest? One of mine is rubbing a bit. Thanks
Hi SidpinupCarefully loose the Sidecarpet on the right ..
You need ratchet and Octal Nut , you'll see to loose and unloose the Bolts.
I take Hydaulic Jack a piece of Wood and Rubber between the DOOR and i tried to ADJUST.
Loose the Bolts form Inside ...but not to much!
But this don't really helps.
Because of the weight and the Angle .... when the the Door is open , you'll have some degrees + or -
and you out of Range... its not so easy...
I take my Motocycle and touch with Tire the Door with a little pressure .....sounds crazy ...but was easy ...haha
But it worked not perfect.
But maybe this is because I'am not Specialist in Bodywork!
So i decide to leaf the Door closed and loose the Bolts internaly.
But this i really hard woooork , you know i'am 186cm tall and there is not so much space in the footwell.
I take tow plastic pieces in exactly that gap of the Door and Body and stuck it into.
Maybe you have to do left and right ...in my case only left (Driverside)
And then a little BIT try and error.
And with a little willing ..it comes to good.
All this i do it by my own.
But i warmly recommend ..take a body for this work.
TTC
Forums | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff


