Vantage Audio and SatNav not working
Vantage Audio and SatNav not working
Author
Discussion

Bessman

Original Poster:

6 posts

16 months

Tuesday 11th August
quotequote all
Hi all, I have just realised that my SatNav and audio(radio and CD) will not operate on my 2008 Vantage roadster. Both worked fine last summer and I rarely use either(I prefer to listen to the sound of the engine) which is why I have only discovered it now... The culprit may be that I replaced the roof control module last October?? It was my own repaired unit and so I did not need to flash the sorftware. I have also just discovered that the SatNav has a CD disc, which is located under the tonneau lid and so makes me wonder if it is connected somehow to the roof control module. I ejected the CD and then re_loaded it, but it didn't bring the SatNav back.....Any ideas or advice is greatly appreciated. Thanks, Bob

ragingfool

182 posts

267 months

Tuesday 11th August
quotequote all
this is often a MOST problem, usually from a failed module. I don't think your roof module is connected to this system (at least the diagram for 2009 shows it is not). however if you search PH and 6speed some say a CANBUS error may cause problem with MOST ring

Bessman

Original Poster:

6 posts

16 months

Wednesday 12th August
quotequote all
Is there a way to "reset" if its a canbus error ??

Bessman

Original Poster:

6 posts

16 months

Friday 14th August
quotequote all
Embarassing to say, but it was just a 5A fuse blown....Fuse F64 (AM/FM receiver module)....Sometimes you just overthink these things!!

RacingSloth69

82 posts

10 months

Friday 14th August
quotequote all
On the plus side, as to go down as one of the cheapest fixes you'll ever find on an Aston smile