Fully charging a DB11 battery
Fully charging a DB11 battery
Author
Discussion

Darkeeboy1

Original Poster:

3 posts

21 months

Tuesday
quotequote all
I have a question regarding fully charging the battery of the DB11. I know that using the trickle charger with the magnetic boot connection isn t sufficient for fully charging the battery, but don t want to remove the rear seat to get access to the battery terminals themselves. Is it safe to charge the battery using a normal car charger crocodile clips in the positive terminal under the bonnet?

Westlondondriver

386 posts

103 months

Tuesday
quotequote all
I would have thought so. That is certainly what I used to do with my DB9. The magnetic connection on the 11 can be used to fully charge the battery as well. My CTEK trickle charger would do it but it took several days or you can use a more powerful ctek (or other brand) with the magnetic connector.

V8 Minotaur

262 posts

26 months

Yesterday (07:22)
quotequote all
Yes, a CTEK battery maintainer via the magnetic adaptor will certainly fully charge the battery.

Simpo Two

93,107 posts

296 months

Yesterday (10:15)
quotequote all
Darkeeboy1 said:
I have a question regarding fully charging the battery of the DB11. I know that using the trickle charger with the magnetic boot connection isn t sufficient for fully charging the battery, but don t want to remove the rear seat to get access to the battery terminals themselves. Is it safe to charge the battery using a normal car charger crocodile clips in the positive terminal under the bonnet?
If you don't like the idea of a croc clip you could bolt a wire to the terminal, eg something like this: https://www.amazon.co.uk/CTE-56260-Direct-Connecto...

I don't like magnetic connectors. Great idea in theory so I had one fitted to the front of my DB9 and within six months the connection was unreliable and getting warm. Few things are less useful than a battery conditioner that's not making contact.

alscar

10,093 posts

244 months

Yesterday (10:45)
quotequote all
For occasional use crocs will work fine but anymore than that I would just use that connection mentioned above - less chance of anything becoming unclipped and just easier to use.

Edited by alscar on Wednesday 18th November 10:54

V8 Minotaur

262 posts

26 months

Yesterday (11:02)
quotequote all
Yes, just make sure to keep the contacts clean and it will be fine.

...also handy if you drive off without remembering to unclip it.

NDA

25,838 posts

256 months

Yesterday (11:06)
quotequote all
Simpo Two said:
If you don't like the idea of a croc clip you could bolt a wire to the terminal, eg something like this: https://www.amazon.co.uk/CTE-56260-Direct-Connecto...
This is what I use - very easy.

You need a routine to ensure you don't drive off with it connected - but then you probably have one already with your magnet connection.

Darkeeboy1

Original Poster:

3 posts

21 months

Thanks all!