4.3 vantage correct alternative bolts for 11mm spacer

[jafbash786]

I cant find conclusive choices despite doing interweb choices

https://ebay.us/m/qHc1mF

Will these bolts work if not can someone kindly direct me to compatible fully threaded bolts to use with 11mm spacers at the front

Thank you

[XMark]

I bought the kits with nuts as they’re hard to find and very expensive when you do. Hard to say if those would do without seeing if they’re threaded all the way to the end, at that price, I’d bet no.

[jafbash786]

Price has nothing to do with thread length it either is or it isnt

I guess i await that sellers response

[ridds]

You need to check the the Taper angle and Surface area.

The original Nuts have a large contact patch on the Taper. The contact patch on those is quite a bit smaller due to the reduced diameter at the top.

[jafbash786]

ridds said:

You need to check the the Taper angle and Surface area.

The original Nuts have a large contact patch on the Taper. The contact patch on those is quite a bit smaller due to the reduced diameter at the top.

Both are 60 degrees i hear u about the contact patch but they should be close enough as long as they sre full threaded its worth a punt

[Mr.Tremlini]

Hi, I used these with 11mm H&R`s front and rear.



2.20€ each for galvanised or 6€ for black.
Got them from here - https://spurverbreiterung.de/en/
they were recommended by Aston specialist Valiant Ecosse.
Search article #: M1420KEGN

[jafbash786]

Thank u!i already ordered the ebay link ones above and submitted an order via uk company to make me some bolt on 20mm rears and 11mm fronts

All in with bolts 178 inc vat and delivery

[jafbash786]

Bimecc italia is all good

Same profile and only 0.2mm smaller threads also start from beginning

20 lugs for 27 pounds with no fear of every swelling

I can keep the aston ones for my rangee or somthing