Triumph Bobton
Author
Discussion

Quinny

Original Poster:

15,944 posts

297 months

Saturday 3rd October
quotequote all
As someone requested a thread on my Bobton I thought I’d oblige for those interested.

Back in 2023 I bought a 17 plate bobber with just 3.5k on the clock. I ran it in standard form for a year or so, and it was a great bike to get around on.

Here it is as I bought it.


Whilst perusing eBay one evening I saw a Triumph Thruxton engine for sale at a frankly ridiculously low price, I actually thought it was probably a scam until I spoke with the seller. Anywho I bought it and thought that’ll be a nice power increase for the Bobber, and it’ll give me a project for the winter.

So the Bobton was born. Triumph Bobber, Thruxton R engine, Thruxton R wheels, Speed twin forks and brakes, Ohlins shock and a few other bits n bobs.

This is the engine from eBay, I connected up the ECU and clocks and this engine had 957 miles on it.
















I initially tried to use the speed twin wiring loom, switchgear, ECU and instruments, but unfortunately it was beyond my skill level to get everything to work and routed correctly. So I ended up using the stock Bobber set up, but copying and pasting the settings from a Thruxton ECU into the Bobber ECU. The bike runs really well but it’s never been on a dyno or anything.















Before and after




I ran it for a year or so as above, then I decided that it needed a custom spray job.









I also swapped out the exhaust for some hitcocks shorties, cat still in place as I’m not a fan of loud exhausts.


This winter it’s going to get a full Thruxton R front end and some speed twin alloy wheels.







Here’s mocking up the rear end. It’s going to need a few mods to get the rear brake lined up correctly





That’s it for now..
































dukeboy749r

3,958 posts

241 months

Sunday 4th October
quotequote all
That’s a lovely looking bike!


markymarkthree

3,717 posts

202 months

Sunday 4th October
quotequote all
Well done, a very handsome bike there. smile

the-norseman

16,004 posts

202 months

Sunday 4th October
quotequote all
Good work! I have a 2022 Bobber which is modified but not the degree yours is, just bolt on stuff and ECU work.



I've just added the Tom Hurley springer seat.

dukeboy749r

3,958 posts

241 months

Sunday 4th October
quotequote all
Do you expect the power upgrade to suit the chassis?

A friend has a fairly standard bobber and just loves the power of the original engine for the riding he does.

the-norseman

16,004 posts

202 months

Sunday 4th October
quotequote all
The OEM mapping on the bobber is awful, far too lean, I had mine mapped its a lot smoother now.

Thornton Hundred run huge power on some of theirs.

Neal H

532 posts

225 months

Sunday 4th October
quotequote all
That is superb work!

Bodo

12,626 posts

297 months

Sunday 4th October
quotequote all
I love every build thread!

MrWideFit

395 posts

21 months

Sunday 4th October
quotequote all
Twas i who requested a thread, it lives up to expectation hehe

Lovely thing

Quinny

Original Poster:

15,944 posts

297 months

Sunday 4th October
quotequote all
dukeboy749r said:
Do you expect the power upgrade to suit the chassis?

A friend has a fairly standard bobber and just loves the power of the original engine for the riding he does.
Yes it’s fine.. with the Ohlins shock and fork internals, and much improved brakes, it’s not really a problem. As with any bobber, the limiting factor is ground clearance. The pegs go down way before any chassis limit is found.

bogie

17,108 posts

303 months

Sunday 4th October
quotequote all
Very nice thumbup

James_0541

136 posts

13 months

Monday 5th October
quotequote all
What fabulous machine, looking forward to the update when the new forks are fitted.

Ghs

907 posts

8 months

Monday 5th October
quotequote all
Great work , stunning .

200Plus Club

13,823 posts

309 months

Monday 5th October
quotequote all
Quinny said:
dukeboy749r said:
Do you expect the power upgrade to suit the chassis?

A friend has a fairly standard bobber and just loves the power of the original engine for the riding he does.
Yes it s fine.. with the Ohlins shock and fork internals, and much improved brakes, it s not really a problem. As with any bobber, the limiting factor is ground clearance. The pegs go down way before any chassis limit is found.
Exactly why I sold mine after a year, lovely bike but pegs digging in constantly at not much lean was a bugbear, particularly after having had a Thruxton R which was a beautifully handling bike.

Bob_Defly

5,962 posts

262 months

Monday 5th October
quotequote all
Great bike!

I love the look of those spoked wheels though, would be a shame to replace them.

Quinny

Original Poster:

15,944 posts

297 months

Monday 5th October
quotequote all
Bob_Defly said:
Great bike!

I love the look of those spoked wheels though, would be a shame to replace them.
I fancy changing the look. Tubeless and a fair bit lighter. But I’ll be keeping the spoked wheels.