Flame Trap mesh
Flame Trap mesh
Author
Discussion

Timja

Original Poster:

1,955 posts

240 months

Thursday 22nd March 2012
quotequote all
Does anyone know if the mesh inside the flame trap is available to buy on its own, or only comes with new flame traps?

Tried a few places like clever trevor, but dont sell the mesh on its own. Also, maybe could do with the o ring to go between flame trap and rocker cover.

Thanks.

Twistygit

800 posts

184 months

Thursday 22nd March 2012
quotequote all
The mesh just washes out with jizer or something like it but I would just buy a new one they are only cheap and you will get the bits you want

MPoxon

5,329 posts

204 months

Thursday 22nd March 2012
quotequote all
Timja said:
Does anyone know if the mesh inside the flame trap is available to buy on its own, or only comes with new flame traps?

Tried a few places like clever trevor, but dont sell the mesh on its own. Also, maybe could do with the o ring to go between flame trap and rocker cover.

Thanks.
I would be interested if you do manage to locate an O ring and mesh. I have a Point-CNC flame trap to go on mine but no replacement mesh or O ring and I wanted to fit new if possible


Jonny cobra

615 posts

243 months

Thursday 22nd March 2012
quotequote all
MPoxon said:
I would be interested if you do manage to locate an O ring and mesh. I have a Point-CNC flame trap to go on mine but no replacement mesh or O ring and I wanted to fit new if possible

If you go to a Boiler parts supllier they normaly have a box of different size " O " rings that might fit . I often get them from them ..

JC.

phillpot

17,524 posts

214 months

Thursday 22nd March 2012
quotequote all
MPoxon said:
I would be interested if you do manage to locate an O ring and mesh.
a good £4 worth ?

djc100

490 posts

277 months

Thursday 22nd March 2012
quotequote all
Just clean the mesh and here is a link to O rings

http://www.ebay.co.uk/itm/Pair-O-Rings-Oil-Cap-Fla...

Pupp

13,036 posts

303 months

Thursday 22nd March 2012
quotequote all
If by 'mesh', you mean the trapping media rather than the plate that retains it (that in turn is retained by the circlip), a couple of those stainless swarf ribbon pan scourers work well smile

MPoxon

5,329 posts

204 months

Thursday 22nd March 2012
quotequote all
djc100 said:
Just clean the mesh and here is a link to O rings

http://www.ebay.co.uk/itm/Pair-O-Rings-Oil-Cap-Fla...
Nice one , cheers thumbup

Dave 500

7,889 posts

273 months

Thursday 22nd March 2012
quotequote all
MPoxon said:
Where did you get that from?

I don't know why but I NEED one hehe

MPoxon

5,329 posts

204 months

Friday 23rd March 2012
quotequote all
Dave 500 said:
Where did you get that from?

I don't know why but I NEED one hehe
The flame trap is from Clive at Point CNC.

http://www.pointcnc.co.uk/car-parts/

I do have a soft spot for quality machined metal accessories so as soon as I saw one I had have it. smile




Timja

Original Poster:

1,955 posts

240 months

Friday 23rd March 2012
quotequote all
MPoxon said:
I would be interested if you do manage to locate an O ring and mesh. I have a Point-CNC flame trap to go on mine but no replacement mesh or O ring and I wanted to fit new if possible
This is why I was asking the question - Very tempted to buy one! Finally getting my rocker covers powder coated and deciding between powder coating/polishing a new flame trap or buying a point cnc one! Obviously the point cnc one doesnt come with o ring or mesh though, hence the question.

hmmm.... decisions decisions....

Thanks for the o ring link!

Mr Haribo

318 posts

220 months

Friday 23rd March 2012
quotequote all
MMmmmmmmmmust have one ! how much was it ? if you dont mind !

Timja

Original Poster:

1,955 posts

240 months

Friday 23rd March 2012
quotequote all
Pretty sure it's about £30 from memory...