clicking rear wheel bearings ?
clicking rear wheel bearings ?
Author
Discussion

nigel carter

Original Poster:

33 posts

210 months

Friday 11th May 2012
quotequote all
Hi there, just got my first tvr,a chimaera and have just noticed a clicking noise comeing from what i think is the drivers side rear wheel bearings, it only dos't from standing still and very slow speeds, the previous owner had fitted new bearings not long ago, and i'm sure it didn't do it on the test drive and the first few times i drove it, has anybody come across this before.I haven't got a socket large enough to get the hub nut off yet so am a bit in the dark cheers

carsy

3,019 posts

196 months

Friday 11th May 2012
quotequote all
Clicking noise could well be cv joint.

Tyre Tread

10,697 posts

247 months

Friday 11th May 2012
quotequote all
carsy said:
Clicking noise could well be cv joint.
This is quite likely but it could be something as simple as a cable tie on the CV joint gaiter catching.

ewan221

1,219 posts

217 months

Friday 11th May 2012
quotequote all
Sounds like a CV joint but possibly a drop link or as I had once small stone in the caliper

SILICONEKID340HP

14,997 posts

262 months

Friday 11th May 2012
quotequote all
Is it a stone in the tyre? ,i bought some new wheel bearings from the local auto factors, only lasted 6 months .

I then went back to the same place ,they supplied some better quality bearings ,another £6 and to date evrything is fine .


Bassfiend

5,530 posts

281 months

Friday 11th May 2012
quotequote all
I'll do a +1 for CV joints ... mine sounded like a tapping sound when cornering slowly. biggrin

Phil

penno

241 posts

261 months

Saturday 12th May 2012
quotequote all
Hi it could be the diff the LSD part not releasing mine click/clunks. Try pushing the car with the front wheels straight there should be no noise. Then turn the steering wheel slightly if it clicks/clunks its the diff LSD not slipping but gripping- you could try some additive to cure

nigel carter

Original Poster:

33 posts

210 months

Saturday 12th May 2012
quotequote all
Hi there, got my socket today (£9 from amazon) torqued up the hub nut no more clicking,just came back from a quick spin gave it a bit of stick still no clicking,so it seems like whoever fitted the bearings didn't torque them up correctly hopefully the're not damaged, anyway thanks to everyone who responded probaly talk to you again soon cheers ooh i luv it

haircutmike

22,511 posts

235 months

Saturday 12th May 2012
quotequote all
Can't remember the lbage but it is mahoosive on those nuts iirc!

Simon says

19,464 posts

252 months

Saturday 12th May 2012
quotequote all
haircutmike said:
Can't remember the lbage but it is mahoosive on those nuts iirc!
yes 185 - 214 ft/lbs