Plug extenders
Plug extenders
Author
Discussion

estutjaweh

Original Poster:

328 posts

186 months

Sunday 12th August 2012
quotequote all
So, I changed the plugs and coil last weekend, wire-brushed the extenders and all was well. Today I encountered power loss, misfires, an unstable tickover and the engine eventually cut out as I wanted to put it back in the garage. Bonnet up and a noticed that a plug extender was ridiculously loose. Now, One was slightly bent when I checked these before and the ends looked like they were probably the original parts still since the factory. Good - I'll get new ones and have peace of mind.

now...after looking at the pictures on the 'TVR Green' website, mine are definitely the suppressive ones. These are no longer available but non-surpressed ones are. What the hell is the difference? Can I fit the non- ones? what effect will that have on performance?

???
Anyone know a good address for the right ones at a fair price?

loud430

550 posts

214 months

Sunday 12th August 2012
quotequote all
hi stu, i bought my last set from tim at act, he did tell me what the difference was but i cant remember now.

carsy

3,019 posts

196 months

Sunday 12th August 2012
quotequote all
Do away with them and fit some of these. One less connection to go wrong and they provide more heat protection than the extenders. A lot cheaper from America and mine arrived in about 10 days.

http://www.ebay.co.uk/itm/Blue-Heat-Protector-Slee...

SILICONEKID340HP

14,997 posts

262 months

Sunday 12th August 2012
quotequote all
Don`t think the 14cux is to sensitive ,I had no problems with the non resistive plug extenders...


Simon says

19,463 posts

252 months

Sunday 12th August 2012
quotequote all
If you have resistive leads you wont need resistive extenders as well thumbup

Twistygit

800 posts

184 months

Monday 13th August 2012
quotequote all
I could be wrong but surpressed is just for radio interference and they are still resistive but have a look at ACT

Simon says

19,463 posts

252 months

Monday 13th August 2012
quotequote all
Twistygit said:
I could be wrong but surpressed is just for radio interference
Electrical noise is bad for for the EFI ECU too but the Lucas CUX unit as proved rather resilient to this wink

estutjaweh

Original Poster:

328 posts

186 months

Monday 13th August 2012
quotequote all
Thanks for the help, I've just ordered the ones that ACT have in stock...seems like they'll do - if not, I'll be back here in a few days with more 'beginner' questions!

Quietlybonkers

22,539 posts

175 months

Monday 13th August 2012
quotequote all
estutjaweh said:
if not, I'll be back here in a few days with more 'beginner' questions!
Join the club, and remember, the TVR guys who know the answers generally love helping us numpties get to grips with the niggles and problems. Thanks guys - its much appreciated angel

oily mist

149 posts

190 months

Monday 13th August 2012
quotequote all
I'm curious about the need for suppression too. I'd accepted that radio reception in the car was pants (and unnecessary with that V8 soundtrack). However, my son tells me that as soon as I start up the car in the garage the TV reception goes fuzzy - I told him that it was the rumble of the exhaust shaking the aerial up on the chimney but really, if it's b****ring up the TV signal then could it also be frazzing any of the engine electronics?