water rail fixing

[Graham]

Does anyone have a pic showing how the water rails that run down the driver side of the block ate attatched?

looks like another bracket i dont have...

G

[phazed]

Throw it away and run a new pair of heater pipes under the inlet manifold!

[Graham]

phazed said:

Throw it away and run a new pair of heater pipes under the inlet manifold!

got a pic of how to do that? how do you route that at the front

g

[phazed]

You take them under the inlet, one goes to the manifold at the front offside. You can see I used a double 15mm elbow, (in black) and the other runs under the alternator to the chrome pipe leading to the bottom hose.

Neatens it up!

[Graham]

ta. any idea how much pipe is needed.

similar setup to mine with the je alt bracket although im still running the mechanical pas

[phazed]

I'd get about 12 ft of heater hose, tis cheap enough and you can use the offcut filled with sand or lead shot on a burglar

[Graham]

lol ta

I'll have a play when the motor goes in then

[Sardonicus]

phazed said:

I'd get about 12 ft of heater hose, tis cheap enough and you can use the offcut filled with sand or lead shot on a burglar

Bloody hooligan