Hunting.
Author
Discussion

disco bob

Original Poster:

261 posts

276 months

Monday 29th November 2004
quotequote all
I am not sure if this as got anything to do with the cold mornings but my car is really struggling to tickover from cold.
It takes a couple of minutes for the car to settle down then its fine.
Can this problem be cured or is it "they all do that".
cheers bob.

chimtvr

1,315 posts

263 months

Monday 29th November 2004
quotequote all
hate to say this favourite quote but "clean the stepper motor"

billynomates

2,101 posts

265 months

Monday 29th November 2004
quotequote all
disco bob said:
I am not sure if this as got anything to do with the cold mornings but my car is really struggling to tickover from cold.
It takes a couple of minutes for the car to settle down then its fine.
Can this problem be cured or is it "they all do that".
cheers bob.


Mine's the same --big lump to warm up

Yep "They all do that"

disco bob

Original Poster:

261 posts

276 months

Monday 29th November 2004
quotequote all
I cleaned the stepper motor about 6 weeks ago so i presumed it could`nt be that or does it need cleaning regulary.

Ballistic Banana

14,706 posts

296 months

Monday 29th November 2004
quotequote all
Call The Police, its been banned hasnt it


BB

pullingpower

260 posts

263 months

Monday 29th November 2004
quotequote all
Mine does this (450 Chim)
Usually very cold mornings with frost. Starts straight away but very lumpy like not all cylinders firing. Lasts about 20seconds and needs gentle reving. Never does this except when cold. Otherwise running smooth so I guess its just due to the temp?

chimtvr

1,315 posts

263 months

Monday 29th November 2004
quotequote all
hmmmm its possible this might be misunderstood but

dont forget to clean inside the hole


you know where the stepper motor goes

K4TRV

1,819 posts

281 months

Tuesday 30th November 2004
quotequote all
chimtvr said:
hmmmm its possible this might be misunderstood but

dont forget to clean inside the hole


you know where the stepper motor goes


Know what you mean.........It's called the Plenum Chamber.

Cleaning the stepper motor "hole" won't do a whole lot when you eventually (maybe never) take the Plenum Chamber off. The inside of the chamber and trumpets etc, will be coated with unburn fuel/exhaust deposits/contaminated oil etc etc. Cleaning the threads and squirting Carb cleaner will dislodge a little crud next to stepper motor, but nothing much else!!

Hope that supports your suggestion ??

Trev McM

andy43

13,205 posts

283 months

Tuesday 30th November 2004
quotequote all
May be coolant temp sensor if cleaning the stepper doesn't cure it?

Jem

548 posts

269 months

Wednesday 1st December 2004
quotequote all
pinking sounds like a loose exhaust.

J