quick thermostat query
quick thermostat query
Author
Discussion

neal1980

Original Poster:

2,585 posts

270 months

Saturday 4th August 2007
quotequote all

Hi,

Ive found my car was not running a thermostat so im just about to install one, ive taken the cover off, now which way do i install it?

Im thinking the longer end (big spring) would be at the back of the engine if that makes sense??? and the short stubby end under the cover?

Thanks

Neal

spend

12,581 posts

282 months

Saturday 4th August 2007
quotequote all
Spring is on the engine side, not the housing/pipe side (they dont normally fit the wrong way round anyway). Ensure the bleed hole is at 12 o'clock to avoid trapping air!

Dave

350Matt

3,914 posts

310 months

Saturday 4th August 2007
quotequote all
Also make sure it a proper TVR part as the std rover one while it will work only has a 25mm Ø hole compared to the TVR one with 32mm Ø so you reduce your cooling capacity with the rover part

Matt

neal1980

Original Poster:

2,585 posts

270 months

Saturday 4th August 2007
quotequote all
thanks guys