Oil pick up strainer

[Tangoed]

Hi

Does anyone know the part number for the oil pick up strainer on a 4ltr. I found small bits of silicone when I was re-sealing the sum.

[phazed]

Just clean it out thoroughly.

Refit with a new paper gasket with a little Hylomar or similar.

Secure the 2 bolts with some thread lock.

[Tangoed]

Cheers Phazed much appreciated

[Sardonicus]

Soak in cellulose thinners it breaks down silicone sealer you can then safely blow it out this way you get all the tiny bits out too even stuck in the corners, dont forget the p/up gasket & put a little thread locker on those 7/16 - 11mm bolts too.