Chimaera electric window closed height

[PhysDoc]

Hi,

Since having a new roof fitted, when closing the doors, the windows are not sitting on the seals properly. Sometimes they also trap the fabric on the edge of the targa. They are closing too high. After having the roof done, the seals must be slightly lower for some reason.

Is there a window height stop adjustment somewhere?

Cheers

[Trevor450]

There is. If you put the window all the way down and shine a light through the brushes at the top, you should see a screw halfway along between the front and rear of the door inside the top edge of the glass. This sets the window height. You will need a long, thin screwdriver to access it.

[PhysDoc]

Okey dokes. Thanks very much

[ianwayne]

It's also at about a 30 degree angle. Don't expect to be able to use a screwdriver at right angles to the glass opening.

I had trouble adjusting mine until I found it