Somehow I have managed to take a couple of small chunks out of the inside of the roof (putting it in the boot no doubt!). The carbon fibre is not affected but the clear resin has been damaged. Has anyone got any idea what can be done to polish it out or fill the chunks?
Thanks.
Use araldite rapid to fill the gouges, leave to set (24hrs at least) & sand down with fine wet & dry paper used wet with some soap.
BE CAREFULL!
Tuesday 13th March 2001
Thanks guys, I will give it a go.
Message Board | Chimaera | Top of Page | What's New | My Stuff
