Would these be attached to anything?
Would these be attached to anything?
Author
Discussion

A900ss

Original Poster:

3,314 posts

183 months

Saturday 24th August 2013
quotequote all
Two metal pipes on near side underside of plenum, should they be attached to anything? It looks like they should.






Edited by A900ss on Saturday 24th August 10:48

Pupp

13,014 posts

303 months

Saturday 24th August 2013
quotequote all
On the donor LR models, they're connected to the cooling system to heat the plenum around the throttle plate for some strange reason - not used on Tivs and the cover can be removed to neaten it up provided the screw holes are blanked (use shorter screws)

A900ss

Original Poster:

3,314 posts

183 months

Saturday 24th August 2013
quotequote all
Thanks. Panic over.

I saw the slight oil on top of the rocker covers and thought oil was coming out from here.

It turns out the oil cap was a bit loose.

Dr Mike Oxgreen

4,469 posts

196 months

Saturday 24th August 2013
quotequote all
Could this have been a system to prevent icing of the throttle and/or the carb on earlier versions of the engine?

Chuffmeister

3,597 posts

168 months

Saturday 24th August 2013
quotequote all
I think it was originally designed to assist cold starting/ running; the warm coolant being circulated to warm the air.