Battery cables +&-
Discussion
I'm probably going to regret my heads idea but after changing my battery I looked at the cables. They're looking tired.
I'd love to change them for new ones and I'm thinking it's a total nightmare mission to change the positive and negative cables for slightly larger new ones.
Am I right (near mission impossible ) or is it relatively doable (without wishing I didn't start doing it)?
I'd love to change them for new ones and I'm thinking it's a total nightmare mission to change the positive and negative cables for slightly larger new ones.
Am I right (near mission impossible ) or is it relatively doable (without wishing I didn't start doing it)?
Definitely worth doing if your current ones are a bit crusty - and given the smallish cable size and the age of our cars that’s not too surprising. And the positive cable from battery to starter is surprisingly long!
I changed all mine a couple of years ago for much fatter ones, and the car starts and runs so much better. But you ll need the dash out to be able to feed the cables through the grommet on top of the tunnel, and getting them nicely fed past the gearbox wasn t easy.
I also fitted a battery cut off switch to the earth side with the switch mounted at the top of the glove box, fitted a new engine earth and also linked the two earth bolts on the top of the transmission tunnel with another short cable as belt and braces.
I had all the cables made to my spec with lengths and crimped ends by a company called Electrical Car Services, they did a nice job.
https://www.electricalcarservices.com/
I changed all mine a couple of years ago for much fatter ones, and the car starts and runs so much better. But you ll need the dash out to be able to feed the cables through the grommet on top of the tunnel, and getting them nicely fed past the gearbox wasn t easy.
I also fitted a battery cut off switch to the earth side with the switch mounted at the top of the glove box, fitted a new engine earth and also linked the two earth bolts on the top of the transmission tunnel with another short cable as belt and braces.
I had all the cables made to my spec with lengths and crimped ends by a company called Electrical Car Services, they did a nice job.
https://www.electricalcarservices.com/
Edited by Mr.Grooler on Sunday 15th November 22:45
Edited by Mr.Grooler on Monday 16th November 20:37
https://www.pistonheads.com/gassing/topic.asp?t=16...
I would add that you can reach the nut at the LH end by opening the glovebox and reaching around. The footwell lamp will need disconnecting to get those wires out and the wires to the dash lamps on/ off switch too. I always drop the steering column, it'd not difficult (13mm socket).
I would add that you can reach the nut at the LH end by opening the glovebox and reaching around. The footwell lamp will need disconnecting to get those wires out and the wires to the dash lamps on/ off switch too. I always drop the steering column, it'd not difficult (13mm socket).
Gassing Station | Griffith | Top of Page | What's New | My Stuff


