500 rear hubs and calipers needed

[FactBV]

I have a pre-cat and am just in the process of putting the 283mm cosworth discs and calipers on the front; I have all the parts. As the car is being restored at the moment I though that I might also convert the solid rear discs to the vented ones that are fitted to the 500, however, I will also need 500 rear hubs and the callipers as they are different. Before I start phoning around the usual TVR breakers, does anyone have two rear hubs and calipers that they would like to sell, maybe due to an upgrade that they have done. Thanks Peter 07764 229155

[Ant.]

You could also get them from a 4x4 sierra cosworth or granada cosworth.
Any Rwd Ford with the 273mm vented discs....

[FactBV]

Ant. said:

You could also get them from a 4x4 sierra cosworth or granada cosworth.
Any Rwd Ford with the 273mm vented discs....

Thanks, all sorted now.

[330p4]

Careful Scorpio are 5 stud not 4
Ian

[Sardonicus]

330p4 said:

Careful Scorpio are 5 stud not 4
Ian

Bearing carriers an calipers are the same though the only bits you need to change
you keep your own hub flanges 4 stud