lights

[paul2000]

Hi everyone canyou tell me is there an easy way to put my head light back on ,i went to change a bulb and the whole light fell into the pod i noticed that there is 3 clips but can anyone tell me how to put the light back on t hanks in advance paul

[ronspeedsix]

I will add som pics. It's a fiddly job.

- Undo one of the levers so that there's room for the light to pull it in.
- Put the light against the two other metal holders trying to get the rim behind the holders. Take care that the metal lips at the backside of the light will fall into the spaces in the plastic mounting ring.
- Keep pressing the light against the two metal holders and pull the light firmly backwards
- Keep it backwards and turn the undone lever in position.
- Maybe the light needs a bit rotation.

[ronspeedsix]

[paul2000]

Many many many thanks great help hope i can return the favour some time thanks again paul

[ronspeedsix]

Welcome...
If you need more pics don't hesitate.

Ronald.

[paul2000]

All done many thanks ready for Mot now.

[Hedgehopper]

Well done....you seemed to have done that quite quickly, photos must have been a big help.

The glasses on my headlight units are dirty (old age), would it be feasible to clean them whilst they are detached but still in the Pod? Is there room to move them around?

[paul2000]

Hi yes there is as long as you not got hand like an ape you will be fine

[Hedgehopper]

Thanks for the advice....just need the courage to try!

[paul2000]

Hi if they are ok beam wise leave them alone as long as they are ok for the mot. but if they are not then have a try its not that hard ,once i got the info showing me how to do it i was fine just taka your time