cam change - tvr power 885

[JKY]

Nearly done - hope to get it running within a day or so!!!!

[Pupp]

Nice one... enjoy the initial start up and running in

How did the cam degree in? I'm always shocked how sloppy the grinders are at hitting the claimed figure...

[JKY]

I had to retard it by 4 degrees to get it per TVR power's specs - it then checked out spot on, using both 40 thou and max lift methods.

[JKY]

Started first turn of the key :-) I was amazed, was expecting some issues but was literally turn the key and it started!

Not sure my neighbours were happy to hear it for 20mins at 2k though!!! Thankfully most were at work this afternoon.......

Edited by JKY on Tuesday 6th April 19:51