HP printer not printing
Author
Discussion

Blackpuddin

Original Poster:

19,611 posts

236 months

Friday 30th October
quotequote all
Got a cheap HP 2810e printer about a year ago. Ran it on the starter cartridges and ordered some non-HP cartridges online as there didn't seem to be any full (305 spec) cartridges anywhere in the packaging.
Printer has been running fine on the non-HP cartridges but now they're empty so I went to fit the original HP ones (which I found later).
Printer now won't print and I have a flashing orange light next to the three coloured dots by the LCD screen.
Followed all the advice online about cleaning the contacts on both cartridges and printer head, no difference.
Did the HP reset (plug out of machine then out of wall, leave for 60 seconds, reconnect, no difference.
Any tech whizzes who know what might be going on?
TIA

Edited by Blackpuddin on Friday 30th October 16:47

skyebear

1,365 posts

37 months

Friday 30th October
quotequote all
This is perfectly normal behaviour for an inkjet printer. The quickest solution is to toss this printer and buy a new one. So far as I can tell, Brother printers seem to come with least hassle.

Blackpuddin

Original Poster:

19,611 posts

236 months

Friday 30th October
quotequote all
Thanks for the post. Yes, printers do seem to be ridiculously consumable these days. I bought this one a year ago to replace another one that became too tired to carry on after what felt like a few weeks.
I've had an online expert who assures me he's human giving me advice all afternoon. I was on the point of following your advice but I've decided to gamble another £28 on genuine HP cartridges which he thinks might help, but even he said the same thing as you. Thinks the cartridges have probably dried up despite being in sealed plastic bags. There comes a point annoyingly early on in the process where you just have to bin the hardware and start again. Mad.

Edited by Blackpuddin on Friday 30th October 16:48

GetCarter

31,341 posts

310 months

Friday 30th October
quotequote all
I have found the answer to this.

My inkjet printer stopped working and refused every attempt to revive it. So I threw it out of a second story window into a snowy night in January, and told it that it had better buck its ideas up.

I bought it back in the next morning and it worked (I kid you not, no really, it did).

No printer has ever messed with me since.

You just have to let them know who is boss.

Blackpuddin

Original Poster:

19,611 posts

236 months

Friday 30th October
quotequote all
Brilliant, I'll give that a go, what have I got to lose? I might try a drop kick for extra manliness.

Sheepshanks

41,401 posts

150 months

Friday 30th October
quotequote all
Certainly HP printer software problems often seem to resolve themselves overnight, even the laser I've got now will one out of ten times refuse to connect and I end up putting docs onto a flash drive and printing from USB.

Cartridge problems on inkjets don't normally just go away though and you can get in a right mess (sometimes literally) with out of date of non-original carts. Ours needed to be left on all the time so it could now and again do its little cleaning routine.

Blib

48,409 posts

228 months

Friday 30th October
quotequote all
GetCarter said:
I have found the answer to this.

My inkjet printer stopped working and refused every attempt to revive it. So I threw it out of a second story window into a snowy night in January, and told it that it had better buck its ideas up.

I bought it back in the next morning and it worked (I kid you not, no really, it did).

No printer has ever messed with me since.

You just have to let them know who is boss.
I assume you now leave the window open whenever you need to print something important?

Blackpuddin

Original Poster:

19,611 posts

236 months

Friday 30th October
quotequote all
Sheepshanks said:
Certainly HP printer software problems often seem to resolve themselves overnight, even the laser I've got now will one out of ten times refuse to connect and I end up putting docs onto a flash drive and printing from USB.

Cartridge problems on inkjets don't normally just go away though and you can get in a right mess (sometimes literally) with out of date of non-original carts. Ours needed to be left on all the time so it could now and again do its little cleaning routine.
Ours has been on all the time too and has been printing fine from both Macs but this cartridge replacement thing has really annoyed it. I've gone softly softly so far but I might go nuclear on its ass tomorrow if my £28 on new HP carts turns out to be good money after bad.

Edited by Blackpuddin on Friday 30th October 17:56

speedyman

1,637 posts

265 months

Friday 30th October
quotequote all
Delete the printer driver and then reboot. It should then reload the driver.

Blackpuddin

Original Poster:

19,611 posts

236 months

Friday 30th October
quotequote all
Hmmm where might that be? In Applications or some such? Sorry. I’m old.

Sebring440

3,264 posts

127 months

Friday 30th October
quotequote all
GetCarter said:
I bought it back in the next morning and it worked (I kid you not, no really, it did).
Where did you buy it from?



jimmyjimjim

8,351 posts

269 months

Saturday 31st October
quotequote all
I gave up on inkjets about 20 years ago. I've a 20 year old color laser that I'm likely binning soon, as I suspect it's beyond economic repair. Streaks on the output.

It probably won't get replaced; I've a 10 year old mono laser that's going strong. It gets used once every few months and outputs perfectly, first time every time.

edit - Amazon have a mono Brother laser printer for 75 quid.

Edited by jimmyjimjim on Saturday 31st October 00:40

Blackpuddin

Original Poster:

19,611 posts

236 months

Saturday 31st October
quotequote all
If the cartridges don’t fix it today I’ll get a laser.

Billy Eyelash

913 posts

239 months

Saturday 31st October
quotequote all
A good strategy may be to buy a cheap printer from Argos ( They are reasonably competitive) along with a three-year care plan.

Given that modern printers are so ste, it is almost a certainty that you will get a new printer every two to three years for only the cost of another service plan.

I have done this in the past wih inkjet printers. Mostly paper feed problems getting me a replacement.

Blackpuddin

Original Poster:

19,611 posts

236 months

Saturday 31st October
quotequote all
Current one came from Argos as it happens. Suspicious it might have been sat in the warehouse for a while before I bought it, which would explain dry cartridges. Anyway we’ll see when the new ones arrive today.

Blackpuddin

Original Poster:

19,611 posts

236 months

Saturday 31st October
quotequote all
Right, all's well that ends well, the new HP cartridges have done the trick and the machine is spewing out prints fit to bust. Probably not the right phrase but whatever it's working so clearly this printer doesn't like non-HP cartridges, or HP ones that might have been sitting around for a while.
So dropkicking the printer down the road is off the agenda, for now at least. A bit of a shame as I was looking forward to that.
Thanks to all for the help.

Sheepshanks

41,401 posts

150 months

Saturday 31st October
quotequote all
speedyman said:
Delete the printer driver and then reboot. It should then reload the driver.
I see it's sorted now, but, based on past experience on Windows machines, I'd only go for deleting the driver as a last resort. I found they got in a right mess to the extent that HP offers a "scrubber" utility to get rid of their software and it had to be run multiple times.

Their printers should usually print a test page from the control panel and if it won't even do that then it's pointless looking further.