Are these plates legal?
Author
Discussion

tinkertaylor

Original Poster:

566 posts

173 months

Thursday 18th April 2013
quotequote all
Just curious. See quite a lot of these sized plates on cars now. (The Focus)


r11co

6,244 posts

261 months

Thursday 18th April 2013
quotequote all
Absolutely. As long as the characters are of regulation size and there is a minimum 11mm background around the letters.

Technically, this is legal...


Kong

1,503 posts

202 months

Thursday 18th April 2013
quotequote all
Look legal to me

TheEnd

15,370 posts

219 months

Thursday 18th April 2013
quotequote all
Yea, they should be.
There's a border and spacing size, but on a "X** XXX" 2 digit plate, you'll be able to shorten it by the amount of that letter.

zed4

7,248 posts

253 months

Thursday 18th April 2013
quotequote all
Ooh, I might do this with my front plate as I have a 6 digit reg. the TVR would look much better with a smaller front plate.

zed4

7,248 posts

253 months

Thursday 18th April 2013
quotequote all
Where can I order a plate of this size, and what is the legal measurement?

r11co

6,244 posts

261 months

Thursday 18th April 2013
quotequote all
zed4 said:
Where can I order a plate of this size, and what is the legal measurement?
Do it yourself. Get a standard sized plate made and then carefully hacksaw and file it. Make sure you score the vinyl backing where you intend to cut with the saw because otherwise the movement of the saw will pull it off the perspex.

Your question regarding legal measurement has already been answered.

SnipsSt

238 posts

238 months

Thursday 18th April 2013
quotequote all
My plate would fit on a short plate, with all the specified spacing etc.

Problem is, none of the 'authorised, registered' plate suppliers (e.g. Halfords) make sizes other than the more standard long or square sizes.

As such, you can only get them from an alternative supplier such as www.fancyplates.com

So, it might meet all the spacing and font specifications, but if you were stopped (which is a possibility with a non-standard plate), and the officer was a stickler, then it wouldn't have the regulation postcode of the supplier and BS (British Standard) marking.

I thought about carrying around the specification for spacing, font size etc, showing the plate met all of those criteria, but I thought better of it - it's an argument you'd never win.

r11co

6,244 posts

261 months

Thursday 18th April 2013
quotequote all
SnipsSt said:
I thought about carrying around the specification for spacing, font size etc, showing the plate met all of those criteria, but I thought better of it - it's an argument you'd never win.
On the contrary. I've used such a plate for over a decade with no trouble.

zed4

7,248 posts

253 months

Thursday 18th April 2013
quotequote all
r11co said:
zed4 said:
Where can I order a plate of this size, and what is the legal measurement?
Do it yourself. Get a standard sized plate made and then carefully hacksaw and file it. Make sure you score the vinyl backing where you intend to cut with the saw because otherwise the movement of the saw will pull it off the perspex.

Your question regarding legal measurement has already been answered.
I doubt I'd get all the rounded edges looking right!

I can see the border needs to be 11mm after the letters, do you know the overall dimension of a shorter plate for a 6 digit reg? Is it 398mm x 112mm?

B17NNS

18,506 posts

278 months

Thursday 18th April 2013
quotequote all
SnipsSt said:
So, it might meet all the spacing and font specifications, but if you were stopped (which is a possibility with a non-standard plate), and the officer was a stickler, then it wouldn't have the regulation postcode of the supplier and BS (British Standard) marking.
Has anyone anywhere ever heard of a bobby getting his knickers in a twist because a numberplate doesn't have this info on?

r11co

6,244 posts

261 months

Thursday 18th April 2013
quotequote all
B17NNS said:
Has anyone anywhere ever heard of a bobby getting his knickers in a twist because a numberplate doesn't have this info on?
Not, but MOT stations are obliged to. The crazy thing is that any postcode will do and it doesn't have to be printed 'in' the plate. Stuck on suffices.

Cliftonite

8,754 posts

169 months

Thursday 18th April 2013
quotequote all
r11co said:
Absolutely. As long as the characters are of regulation size and there is a minimum 11mm background around the letters.

Technically, this is legal...

No it isn't. The hyphen (at least) makes it not legal. What colour are the characters?


r11co

6,244 posts

261 months

Thursday 18th April 2013
quotequote all
Cliftonite said:
No it isn't. The hyphen (at least) makes it not legal. What colour are the characters?
That is not a hyphen - that is a hole cut in the plate! The regulation 11mm is maintained around all the letters, but this particular plate could fall foul of a subjective interpretation of the rules in the same way a questionably positioned screw would.

Cliftonite

8,754 posts

169 months

Thursday 18th April 2013
quotequote all
r11co said:
Cliftonite said:
No it isn't. The hyphen (at least) makes it not legal. What colour are the characters?
That is not a hyphen - that is a hole cut in the plate! The regulation 11mm is maintained around all the letters, but this particular plate could fall foul of a subjective interpretation of the rules.
Clever!

But the whole thing is still a piss-take. And having that word on a registration plate is hardly a touch of class! Chav with cash?


r11co

6,244 posts

261 months

Thursday 18th April 2013
quotequote all
Cliftonite said:
But the whole thing is still a piss-take. And having that word on a registration plate is hardly a touch of class! Chav with cash?
I agree wholeheartedly.

Ozzie Osmond

21,189 posts

277 months

Thursday 18th April 2013
quotequote all
r11co said:
Technically, this is legal...

nonsense.

  • that's not a "plate" at all.
  • that's not one of the layouts in the permitted diagrams.
  • that's not rounding the "corners" of a plate.
Specifications for registration plates - Regulation 10.
(1) A registration mark must be displayed on a registration plate....
(6) The corners of a registration plate may be rounded off....

These regulations allow shaped edges to a plate as seen on the back of some Rovers and Jags. They do not allow complete stupidity.

B17NNS

18,506 posts

278 months

Thursday 18th April 2013
quotequote all
r11co said:
Not, but MOT stations are obliged to. The crazy thing is that any postcode will do and it doesn't have to be printed 'in' the plate. Stuck on suffices.
Interesting. What about MOT's for vehicles registered prior to this legislation?

Rules say absolutely no other text but dealerships still put logos and phone numbers on new cars. Presumably your new car could fail its first MOT on number plates.

r11co

6,244 posts

261 months

Thursday 18th April 2013
quotequote all
Ozzie Osmond said:
nonsense.

  • that's not a "plate" at all.
  • that's not one of the layouts in the permitted diagrams.
  • that's not rounding the "corners" of a plate.
Specifications for registration plates - Regulation 10.
(1) A registration mark must be displayed on a registration plate....
(6) The corners of a registration plate may be rounded off....

These regulations allow shaped edges to a plate as seen on the back of some Rovers and Jags. They do not allow complete stupidity.
Section (1) means that decals attached to the bodywork are no longer permissible (only applies to vehicles registered after the legislation). There is no definition as to the shape of a 'plate', and as far as I can make out it corresponds perfectly with layout 2 of the DVLA guidelines...

Edited by r11co on Thursday 18th April 21:10

pimpin gimp

3,319 posts

231 months

Thursday 18th April 2013
quotequote all
SnipsSt said:
My plate would fit on a short plate, with all the specified spacing etc.

Problem is, none of the 'authorised, registered' plate suppliers (e.g. Halfords) make sizes other than the more standard long or square sizes.
They did 12 months ago when I had my plates made up. They do standard size and then two smaller sizes depending on how many digits you have.