Traffic calming on off slip from Dual Carriageway
Traffic calming on off slip from Dual Carriageway
Author
Discussion

mr9lt

Original Poster:

50 posts

253 months

Monday 15th May 2006
quotequote all
A simple question for someone for sure..... what is the legal minimum distance that a district council can sign post a 30MPH speed limit, from the exit from an arterial dual carriageway with no advance warning from the main carriageway. The off slip is no more than 100 metres long and has a slight left hand bend, then a sighting distance of less than 60 metres to an obscured 30 sign.

[url]www.streetmap.co.uk/newmap.srf?x=259500&y=55500&z=3&sv=259500,55500&st=4&ar=Y&mapp=newmap.srf&searchp=newsearch.srf&ax=259500&ay=55500[/url]

7db

6,060 posts

260 months

Monday 15th May 2006
quotequote all
It can be immediately adjacent to the road in law - I'll see if I can dig out some guidelines if they differ, however, from the strict legal position.

>> Edited by 7db on Monday 15th May 18:01

matchless

1,105 posts

252 months

Monday 15th May 2006
quotequote all
for your information you canot refer to Metres on a British road sign by the way it is illegal, did you know that?

mr9lt

Original Poster:

50 posts

253 months

Tuesday 16th May 2006
quotequote all
Nope was only giving the distance to the sign from the main road. But thanks anyhow

Flat in Fifth

48,860 posts

281 months

Tuesday 16th May 2006
quotequote all
Just for info mr9lt have seen somewhat similar circumstances off a jn on M6.

Curving slip road which splits, limit technically 70 though to be fair one should peg back to around 50-ish in normal circumstances.

Just round the bend approaching road works confronted by a 20 with no prior warning.

Somewhat unamusing.

twister

1,591 posts

266 months

Tuesday 16th May 2006
quotequote all
matchless said:
for your information you canot refer to Metres on a British road sign by the way it is illegal, did you know that?


As I understand things, this isn't entirely true. All measurements must be shown in imperial, but certain types of sign (height and width restrictions for sure) may also show the metric equivalent.