Question - Police use of stingers - can any bib's answer?
Discussion
not a bib but know about these things
stingers are deployed from a case with no protection on the spikes, the operative has to wear protective gloves each spike is replaceable once the device is used
there is another device used called the stop stick and the spikes are deployed in triangular box which protects the spikes (one use only ..)
stingers are deployed from a case with no protection on the spikes, the operative has to wear protective gloves each spike is replaceable once the device is used
there is another device used called the stop stick and the spikes are deployed in triangular box which protects the spikes (one use only ..)
wildone63 said:
What made me ask the question is that i seem to recall a tv programme where the traffic cop had to remove a protective cover from every spike before the device was deployed,it might have been an american programme
If you had to do that here the car you were trying to stop would be long gone .... you just get it out the box, put on eye protection and gloves and chuck it out into the road at the appropriate moment .... in theory 
Yes they do have little covers on each spike. They were put on after a while to stop unnecessary injury to officers just catching themselves on them ... they are bloody sharp! But you do not have to take them off, the tops are very thin and the spike simply pokes through into the tyre as normal 
This picture shows them quite well..

Rgds
RC

This picture shows them quite well..

Rgds
RC
Mr_annie_vxr said:
Bibs_LEF said:
I thought that the use of these had been curtailed after once bounced back and hit the officer?
Box or the stinger itself?Not to my knowledge, although run flats and the airless tyres being developed are causing problems.
"X-Net".
Edited by nats1rt on Monday 5th May 12:22
nats1rt said:
Mr_annie_vxr said:
Bibs_LEF said:
I thought that the use of these had been curtailed after once bounced back and hit the officer?
Box or the stinger itself?Not to my knowledge, although run flats and the airless tyres being developed are causing problems.
"X-Net".
becca_ said:
nats1rt said:
Mr_annie_vxr said:
Bibs_LEF said:
I thought that the use of these had been curtailed after once bounced back and hit the officer?
Box or the stinger itself?Not to my knowledge, although run flats and the airless tyres being developed are causing problems.
"X-Net".
Stingers/stopsticks take time to set up/deploy so this shouldn't be any different. As long as there is run off space all three of these work well.
Mr_annie_vxr said:
Getting it out the box and not cutting yourself is the easy bit.....
Seen a colleague once throw the box rather than the stinger as he got it all tangled up and the car was on top of him..
Not an approved technique.
Throwing it perfectly but upside down is another good method Seen a colleague once throw the box rather than the stinger as he got it all tangled up and the car was on top of him..
Not an approved technique.

Mr_annie_vxr said:
Bibs_LEF said:
I thought that the use of these had been curtailed after once bounced back and hit the officer?
Box or the stinger itself?Not to my knowledge, although run flats and the airless tyres being developed are causing problems.
Given the current state of materials and manufacturing technology, would it not be possible to produce tyres with a suitably hard tread area for wear resistance and level of grip, and a more resilient core material, that would provide satisfactory characteristics in terms of ride comfort and handling qualities?
I ask this in relation to some of the extremely low profile tyres, which look to me as if they contribute little in terms of ride comfort (due to the very shallow sidewalls) leaving the suspension to take care of that.
It's just idle thinking again, probably all rubbish
although being freed from the worry of high speed blowouts would be welcome.Best wishes all,
Dave.
Gassing Station | Speed, Plod & the Law | Top of Page | What's New | My Stuff


