Front plates
Author
Discussion

wooooody

Original Poster:

920 posts

268 months

Sunday 25th May 2008
quotequote all
Like many elises, my front number plate keeps being dislodged by speed bumps etc.. and spends a significant amount of it's time in the boot as a result. The traffics stopped by for a chat as I filled the Elise with petrol a couple of days ago to ask where it was. The chap driving suggested I get a stick-on plate, at which I queried the legality of such a plate. I was under the impression number plates had to be displayed vertically? Both officers had never heard of this, and looked at each other completely blankly, before stating something along the lines of 'as long as it's on a reflective background, it dosen't matter. I've seen loads of cars with stick on plates on the bonnet, never bothered me, I doubt very much you'd get stopped. I'd not stop you' at which the other officer shook his head.

So, not that I particualy want a stick-on plate, but how legal are they? I'm more concerned that the car has now been noted, especially as there is another W plate Titanuim S1 nearby, also sans front plate.

SS HSV

9,646 posts

289 months

Sunday 25th May 2008
quotequote all
We had this conversation on the Ultima forum a few years ago. Some officers turn a blind eye and some want blood. Its pure chance IMO. Providing you have done nothing wrong the only person likely to say something is a BIB and worse case scenario is you have to change it.. Personaly I would leave it until ordered to change it and plead ignorant. There may be some newer relevance now that ANPR is everywhere as their cameras require plates to be flat and at 90
% to the horizontal as thats what they are set up to read but dont quote me on that.

jondude

2,441 posts

248 months

Sunday 25th May 2008
quotequote all
The stick on plates are illegal unless your car is so old it had one as an original. Some E-types, methinks??

I agree with the above that this is all down to the cop who sees you, and if he wants to make a big deal of it or not. So that is a question you should put to yourself - am I good at dealing with the police at the roadside, do I have the correct manner to get away with a bit of small talk?

I know no policeman is ever going to admit to this on a public forum, but there is also the issue of the car you are driving. A Lotus is much more of a red rag to petty policeman than a Hyundai Accent without a plate. You can come across more as someone deliberately taking the pee...not a good start with anyone, let alone a copper with a badge. ( And let's be fair to the police here, many fast car owners ARE taking the pee and deliberately fixing their plates )

I'd expect any hidden laser traps to immediately and thoroughly focus on you - no matter what speed you are travelling - and keep that gun on your rear plate for as long as possible.

Simply, you are drawing much more attention to a car which already gets too much attention as it is!

All in all, for me it just isn't worth the hassle - not in a Lotus.

But hey, if you can relax and stay relaxed when confronted, why not? I think the first time offence is a 30 quid fine but it stays on record that you were done, so if caught again the book will be thrown at you.

Petemate

1,674 posts

222 months

Sunday 25th May 2008
quotequote all
jondude said:
The stick on plates are illegal unless your car is so old it had one as an original. Some E-types, methinks??
As a very old git, AFAIR yes, the E-type is OK with stick-ons, as came from the manufacturer without any provision for "normally" mounted front plate. There was great debate about this years ago. There may also be other similarly-designed cars out there. As stated, the BiB are usually pretty decent about such things; for a while I was in the clutches of the Robin Hood kit car brigade, and when I built mine I mounted the front plate correctly but there are many friends with kits with stick-ons that have no probs. It must be down to the way one conducts oneself on the highway - take the p33 and you will be stopped and/or done.

satchbot

1,916 posts

227 months

Sunday 25th May 2008
quotequote all
Road Vehicles (Display of Registration Marks) Regulations 2001

Expressions used in regulations 4 -11 of the Road Vehicles (Display of Registration Marks) Regulations 2001 relating to registration plates mean as follows:-

DIAGONAL LENGTH, in relation to a relevant area, means the length of a line drawn diagonally across the square enclosing the area (so that the extent of the relevant area is thereby delimited);

RELEVANT AREA, in relation to a registration plate, means the area contained in a square described on the ground -

(a) in front of the vehicle in the case of a plate fixed on the front of the vehicle, and

(b) behind the vehicle in the case of a plate fixed on the rear of the vehicle,

where one corner of the square is immediately below the middle of the plate and the diagonal of the square from that corner is parallel to the longitudinal axis of the vehicle



Doesn't seem to indicate where or how it should be fixed to the car.

Petemate

1,674 posts

222 months

Sunday 25th May 2008
quotequote all
satchbot said:
Road Vehicles (Display of Registration Marks) Regulations 2001

Expressions used in regulations 4 -11 of the Road Vehicles (Display of Registration Marks) Regulations 2001 relating to registration plates mean as follows:-

DIAGONAL LENGTH, in relation to a relevant area, means the length of a line drawn diagonally across the square enclosing the area (so that the extent of the relevant area is thereby delimited);

RELEVANT AREA, in relation to a registration plate, means the area contained in a square described on the ground -

(a) in front of the vehicle in the case of a plate fixed on the front of the vehicle, and

(b) behind the vehicle in the case of a plate fixed on the rear of the vehicle,

where one corner of the square is immediately below the middle of the plate and the diagonal of the square from that corner is parallel to the longitudinal axis of the vehicle



Doesn't seem to indicate where or how it should be fixed to the car.
Blimey....
Pete

eccles

14,415 posts

253 months

Sunday 25th May 2008
quotequote all
I thought the real issue with stick on plates on modern cars was that they don't comply with the relevant British standards for number plates, and with the new rules for number plates would they now pass an MOT ?
I went into all this a few years ago and had a bit of digging online, and I seem to recall that there are rules about mounting and should be vertical, or if not, as vertical as possible.
Having said that, my Mini Jem (pic in my profile) had a stick on plate on the nose for the 17 years i owned it, i used it regularly and it was never mentioned once in the several times i've been pulled over by the police.

ylee coyote

420 posts

267 months

Sunday 25th May 2008
quotequote all
satchbot said:
Road Vehicles (Display of Registration Marks) Regulations 2001

Expressions used in regulations 4 -11 of the Road Vehicles (Display of Registration Marks) Regulations 2001 relating to registration plates mean as follows:-

DIAGONAL LENGTH, in relation to a relevant area, means the length of a line drawn diagonally across the square enclosing the area (so that the extent of the relevant area is thereby delimited);

RELEVANT AREA, in relation to a registration plate, means the area contained in a square described on the ground -

(a) in front of the vehicle in the case of a plate fixed on the front of the vehicle, and

(b) behind the vehicle in the case of a plate fixed on the rear of the vehicle,

where one corner of the square is immediately below the middle of the plate and the diagonal of the square from that corner is parallel to the longitudinal axis of the vehicle



Doesn't seem to indicate where or how it should be fixed to the car.
The way I read this is that the rear plate must be vertical and "square on " but there is no rules for the front ....

Am I wrong ?

satchbot

1,916 posts

227 months

Sunday 25th May 2008
quotequote all
I read it as square on for front and rear.

softtop

3,173 posts

278 months

Sunday 25th May 2008
quotequote all
so how is everyone getting an MOT?

Dwight VanDriver

6,583 posts

275 months

Sunday 25th May 2008
quotequote all
satchbot said:
Road Vehicles (Display of Registration Marks) Regulations 2001

Expressions used in regulations 4 -11 of the Road Vehicles (Display of Registration Marks) Regulations 2001 relating to registration plates mean as follows:-

DIAGONAL LENGTH, in relation to a relevant area, means the length of a line drawn diagonally across the square enclosing the area (so that the extent of the relevant area is thereby delimited);

RELEVANT AREA, in relation to a registration plate, means the area contained in a square described on the ground -

(a) in front of the vehicle in the case of a plate fixed on the front of the vehicle, and

(b) behind the vehicle in the case of a plate fixed on the rear of the vehicle,

where one corner of the square is immediately below the middle of the plate and the diagonal of the square from that corner is parallel to the longitudinal axis of the vehicle



Doesn't seem to indicate where or how it should be fixed to the car.
Reg 5(5)(b) of that SI outlines the plate has to be in a position so that it is visible under the criteria of Reg 5 (6).
In that area the plate has to be fixed.

Go further on to Reg 10 and Part 1 Schedule 2 of that SI and all will be revealed in the format of the plate and 'stick on' not permitted on the 'modern' car because they will not comply, neither will they display the BS AU 145d stamp of approval or even the name of the supplier of the plate.

Older vehicles escape the Reg (Registered pre 1.1.73) but those plates have to comply with BS AU 145 dated 31.10.67 which I understand not as stringent as the modern BS AU.

dvd

fluffnik

20,156 posts

258 months

Sunday 25th May 2008
quotequote all
Motorcycles do without and the world hasn't ended.

Abolish them - less plastic, less drag, less weight == smaller carbon feet...

Mactac

645 posts

224 months

Sunday 25th May 2008
quotequote all
softtop said:
so how is everyone getting an MOT?
on for that day of the year then falls off again

(Five years now roughly)

satchbot

1,916 posts

227 months

Sunday 25th May 2008
quotequote all
Dwight VanDriver said:
satchbot said:
stuff
Reg 5(5)(b) of that SI outlines the plate has to be in a position so that it is visible under the criteria of Reg 5 (6).
In that area the plate has to be fixed.

Go further on to Reg 10 and Part 1 Schedule 2 of that SI and all will be revealed in the format of the plate and 'stick on' not permitted on the 'modern' car because they will not comply, neither will they display the BS AU 145d stamp of approval or even the name of the supplier of the plate.

Older vehicles escape the Reg (Registered pre 1.1.73) but those plates have to comply with BS AU 145 dated 31.10.67 which I understand not as stringent as the modern BS AU.

dvd
Thanks for that - couldn't seem to find it when I was searching. The hamsters will be going on a course.

AL600-or-so

2,679 posts

249 months

Monday 26th May 2008
quotequote all
fluffnik said:
Motorcycles do without and the world hasn't ended.

Abolish them - less plastic, less drag, less weight == smaller carbon feet...
& fewer speeding tickets... driving

jondude

2,441 posts

248 months

Monday 26th May 2008
quotequote all
AL600-or-so said:
fluffnik said:
Motorcycles do without and the world hasn't ended.

Abolish them - less plastic, less drag, less weight == smaller carbon feet...
& fewer speeding tickets... driving
Yes, but this won't stay the case if motorcycles start becoming too popular. Right now, buying bikes is both incredibly expensive and full of government red tape, which together has moved it from A-B transport as in the 60s and 70s, to weekend play thing.

There were moves to make front plates mandatory on bikes, not least as they could be quite small and flimsy because the cameras today are so powerful. ( They were banned because they were set up like razor blades before )

If bikers move from being a minority, they will get slammed. It is the British way.