Bike tyres on a car - legal?
Discussion
I have seen some vintage cars with bike tyres on them, but they have been in museums, and the aim there was probably merely to put *something* on the wheels to make it presentable. I doubt they got driven. 60's pattern tyres have the square shouldered profile that makes them look ok on a vintage car (and work terribly on a bike).
I'm not sure but aren't most bike tyres cross-ply?
I'm not sure but aren't most bike tyres cross-ply?
tyres are tyres , car tyres are often fitted on the rear of bikes i see no reason why provided the tyre is fit for purpose with regards to size, compound and load rating that a bike tyre couldnt be fitted on a car, finding one that meets that criteria may be hard though .
Cant think of any reason you would want to though
Cant think of any reason you would want to though
lgw said:
Chrispy Porker said:
thinfourth2 said:
Are you sure it is illegal?
As what about those funky three wheeled carvers which do lean the front half.
They are motorcycles!As what about those funky three wheeled carvers which do lean the front half.
Think Reliant Robin, as the classic example.
Chrispy Porker said:
lgw said:
Chrispy Porker said:
thinfourth2 said:
Are you sure it is illegal?
As what about those funky three wheeled carvers which do lean the front half.
They are motorcycles!As what about those funky three wheeled carvers which do lean the front half.
Think Reliant Robin, as the classic example.

catso said:
Chrispy Porker said:
lgw said:
Chrispy Porker said:
thinfourth2 said:
Are you sure it is illegal?
As what about those funky three wheeled carvers which do lean the front half.
They are motorcycles!As what about those funky three wheeled carvers which do lean the front half.
Think Reliant Robin, as the classic example.

mchammer89 said:
catso said:
Chrispy Porker said:
lgw said:
Chrispy Porker said:
thinfourth2 said:
Are you sure it is illegal?
As what about those funky three wheeled carvers which do lean the front half.
They are motorcycles!As what about those funky three wheeled carvers which do lean the front half.
Think Reliant Robin, as the classic example.

You can ride a Tricycle upto 750kg on either a car or a bike licence and there is no requirement for a helmet (if one were a suicyclist).
I can't think of a reason why you cannot use a bike tyre on a car. It would surely be an interesting feat of engineering to go about safely attaching said bike wheel to a car, however I cannot see how it is illegal provided all C&U regulations are in order and the wheel isn't about to fall off and the brakes work.
WRT to bike tyres being cross-ply... as said, most are now radial, certainly on larger bikes.
liner33 said:
tyres are tyres , car tyres are often fitted on the rear of bikes i see no reason why provided the tyre is fit for purpose with regards to size, compound and load rating that a bike tyre couldnt be fitted on a car, finding one that meets that criteria may be hard though .
Cant think of any reason you would want to though
car tyres are not often fitted to bikes ! this is illegal in the uk unless fitted to a combination with the correct wheel conversion .i have however seen a triumph rocket 3 recently with a car rear tyre fitted ,Cant think of any reason you would want to though
it will fail its next mot if he lasts that long ,god knows how badly it must handle .
Edited by bimsb6 on Thursday 5th June 19:49
Thanks for all the replies. The question came from a conversation with a mate who was looking for some skinny tyres to go on narrow 16-inch diameter wheels (15-inch would be easy, 135R15s from a 2CV). What he had in mind was as per Londonbabe's reply.......
londonbabe said:
I have seen some vintage cars with bike tyres on them, but they have been in museums, and the aim there was probably merely to put *something* on the wheels to make it presentable. I doubt they got driven. 60's pattern tyres have the square shouldered profile that makes them look ok on a vintage car (and work terribly on a bike).
..... square shoulders would look more car tyre and the sidewalls would probably be stiff enough for a lightweight car.Sidewall construction?
A car with 4 wheels would have a weight rating. Take a 1500kg car. Each tyre must be able to support 1500/4, so just under 400kg each.
Sportsbikes, which have pretty wide tyres (eg a 190 section), weigh typically 190-200kg + rider, + pillion. I know cars take people too, but on a bike the ratio is higher. But if you work it out, I think the operating envelope for a motorcycle tyre doesnt need to sustain so much weight, and it will be built to a lower tolerance.
My guess would be that it would lead to a tyre failure if used on a car after not too long a time. It goes without saying that that would be dangerous \ potentially fatal.
A car with 4 wheels would have a weight rating. Take a 1500kg car. Each tyre must be able to support 1500/4, so just under 400kg each.
Sportsbikes, which have pretty wide tyres (eg a 190 section), weigh typically 190-200kg + rider, + pillion. I know cars take people too, but on a bike the ratio is higher. But if you work it out, I think the operating envelope for a motorcycle tyre doesnt need to sustain so much weight, and it will be built to a lower tolerance.
My guess would be that it would lead to a tyre failure if used on a car after not too long a time. It goes without saying that that would be dangerous \ potentially fatal.
big_rob_sydney said:
Sidewall construction?
A car with 4 wheels would have a weight rating. Take a 1500kg car. Each tyre must be able to support 1500/4, so just under 400kg each.
Sportsbikes, which have pretty wide tyres (eg a 190 section), weigh typically 190-200kg + rider, + pillion. I know cars take people too, but on a bike the ratio is higher. But if you work it out, I think the operating envelope for a motorcycle tyre doesnt need to sustain so much weight, and it will be built to a lower tolerance.
Rob, in this instance the weight of the car would be approx 750kg, which would work out at 187.5kg at each corner.A car with 4 wheels would have a weight rating. Take a 1500kg car. Each tyre must be able to support 1500/4, so just under 400kg each.
Sportsbikes, which have pretty wide tyres (eg a 190 section), weigh typically 190-200kg + rider, + pillion. I know cars take people too, but on a bike the ratio is higher. But if you work it out, I think the operating envelope for a motorcycle tyre doesnt need to sustain so much weight, and it will be built to a lower tolerance.
Compare that to my old bike which (with me and Mrs FR riding pillion) would weigh in at approx 365kg, so 182.5kg at each end. Not that far off weight-wise.
Again bike tyres would only be on the front but then like you I would still have doubts about the sidewall strength.
Gassing Station | Speed, Plod & the Law | Top of Page | What's New | My Stuff



