SVA Blues... Anybody got some wheels I could Borrow ??
Discussion
Took my 2001 to SVA today but it's failed on the wheels sticking out side of the wheel arches to much...
I fitted Z06 wheels and now wish I hadn't..
Can any one help and lend me some front wheels normal 8.5" wide ? Would give Bear mooney for your help ??? Live near Coventry...
Cheers
Clive
I fitted Z06 wheels and now wish I hadn't..
Can any one help and lend me some front wheels normal 8.5" wide ? Would give Bear mooney for your help ??? Live near Coventry...
Cheers
Clive
gtrclive said:
Took my 2001 to SVA today but it's failed on the wheels sticking out side of the wheel arches to much...
I fitted Z06 wheels and now wish I hadn't..
Can any one help and lend me some front wheels normal 8.5" wide ? Would give Bear mooney for your help ??? Live near Coventry...
Cheers
Clive
Who is "Bear Mooney"? is this a relation of Wayne Rooney?
I have a set of Z06 wheels on my.....Z06 and the fronts are off the car at the moment and I work in Warwick, so you are welcome to borrow them and fit them onto the back if that helps you out.
You will get to know my posts by the Speelling.....
Thanks alot bud but I am putting my front Z06 wheels on the back, so that they will pass the rear, so I realy need a set of standard 8.5" fronts to get the front narrow enough.....
What aload of hassel... are the Z06 bodies slightly wider than the normal wings ??
Funny thing is that the SVA Guy said they didn't even have to be round ? I could use bent wheels and bold tyres, as long as the tyres where "E" marked with the correct speed rating and would stay inflated for an about and hour and be inside the wheel arches it would still pass.....
Makes a mockery of the system realy, when they fail my nice new wheels that stick out about 5mm from the arches.....
Thanks alot bud but I am putting my front Z06 wheels on the back, so that they will pass the rear, so I realy need a set of standard 8.5" fronts to get the front narrow enough.....
What aload of hassel... are the Z06 bodies slightly wider than the normal wings ??
Funny thing is that the SVA Guy said they didn't even have to be round ? I could use bent wheels and bold tyres, as long as the tyres where "E" marked with the correct speed rating and would stay inflated for an about and hour and be inside the wheel arches it would still pass.....
Makes a mockery of the system realy, when they fail my nice new wheels that stick out about 5mm from the arches.....
Gassing Station | Corvettes | Top of Page | What's New | My Stuff


